Recent content by aaaslayer

  1. aaaslayer

    OVRLND CAMPERS ONLY : Post your OVRLND Camper build here or a link to your build thread to inspire others!

    I'll post here and the Facebook group. I just got back from a Big Bear trip in SoCal over the weekend and need to clean out the camper and do a bit of refining, change things out and add some D rings to strap down fridge and totes. Always refining the setup.
  2. aaaslayer

    OVRLND CAMPERS ONLY : Post your OVRLND Camper build here or a link to your build thread to inspire others!

    How do the squares hold up in the summer heat? I wanted to try that, but afraid they'll fall off during the Southern California heat waves or start to peel off at the corners or peel off the moment I add weight with velcroed items. I am now leaning on buying a roll of that cheap carpet they...
  3. aaaslayer

    OVRLND CAMPERS ONLY : Post your OVRLND Camper build here or a link to your build thread to inspire others!

    I have a giant standing drill press and slide vise I just didn't want to resort to using it. Lazy I'll admit. I tried the step bit method too, it worked somewhat ok but still bounced around with chatter. I'm sure the step bit chucked into the drill press would work best. It's a 1.5" step bit but...
  4. aaaslayer

    OVRLND CAMPERS ONLY : Post your OVRLND Camper build here or a link to your build thread to inspire others!

    I bolted right through the studs. My rear half barn door does not have a middle stud, only the stud to the left and right (pretty much the frame). Don't do what I did though, I didn't realize the right stud sits on top of the weather gasket and aluminum angle, and I drilled through both the...
  5. aaaslayer

    OVRLND CAMPERS ONLY : Post your OVRLND Camper build here or a link to your build thread to inspire others!

    Next project for the camper, passenger side half barn door getting some 8020 bolted into the studs, and mounting my 10lb propane tank and tank mount, and some quick fists for my axe and shovel. 32 lbs for the tank setup, should be okay right? My biggest concern is 32 lbs or so, hanging out the...
  6. aaaslayer

    OVRLND CAMPERS ONLY : Post your OVRLND Camper build here or a link to your build thread to inspire others!

    Love to see people take on the custom route to frame up and do their own doors. I need inspiration to do mine as well. Been drawing out some ideas on how to add bottom half barn doors to my existing barn doors. I wish they offered this from factory.
  7. aaaslayer

    OVRLND CAMPERS ONLY : Post your OVRLND Camper build here or a link to your build thread to inspire others!

    You did an awesome job. What welder are you running and spool gun? 110v or 220v?
  8. aaaslayer

    One (1) Method 305 NV Machined 17x8.5 8x6.5 Lug Pattern Spare Wheel Never Installed

    bump anyone need a spare wheel it is brand new low ball me I want it gone
  9. aaaslayer

    Interior wall/ceiling covering

    I had coroplast for 2 years and finally removed it early this 2024. After a few summers and winters in Southern CA, it started to warp. Especially during summer, it bows out. I had it attached to the framing of the camper with velcro. No screws. I removed it all. It worked great and looked good...
  10. aaaslayer

    WTB - OVRLND Camper (or similar) Ram 2500 - Seattle/PNW

    I have a 2021 OVRLND camper on my 2021 Power Wagon (bought it Dec 2021). I miss my truck being a truck and a simple rack and roof top tent. I'm considering selling.. I'm in Southern CA Inland Empire area. Ever come out this way?
  11. aaaslayer

    One (1) Method 305 NV Machined 17x8.5 8x6.5 Lug Pattern Spare Wheel Never Installed

    low ball me someone I want this wheel gone
Top