Recent content by hogasm

There’s no difference between ambulance and reg e series ball joints

255/70/15 tires is what we used to drive on The Point in Hatteras for years without problems. We pulled a 12’ aluminum boat with a 9.9hp outboard motor, had a 120qt cooler with fishing rods on the front. Air pressure 12lbs. This was on a e150. The more weight put over the rear axle the better

Sent you info for a black one Brian

Is this still available Hogasm1 @gmail

How much do you want for the front end parts? I’d be installing them on a 97 ambo I bought from you 4 years ago

305-70-16 KO2’s With bilstein medium duty shocks 7.3 Can’t get pics to load On 3 set of springs...657k miles

#11. Its free

Do they fit the sterling or stock van rear

1. It’s the injector orings 2. Without seeing your 125 page wiring harness diagram it’s hard to answer...mine had a switch for the ground under the drivers seat that disconnected the box’s power

For those with the digital controller what pulse width do you set the fuel pump for.....at least that is what mine calls it It came set at 4.6kh

No silver flakes.....tank ok

DetroitDarin: Water to air IC's are great for drag racing and Bonneville LSR, but in a street rig, once the water gets warm, then hot, there's no benefit to that type of IC system. I have thought about spraying the IC external fins with water from the windshield washer or other reservoir, while...

I am looking for some of the aluminum trim pieces that were installed on the cabinetry in ambulances. I incorporated as much of the original trim that I could from our ambulance but with the rebuild I have more doors and drawers than the original.