Recent content by Jambulance80

I pulled the hoseline out because the previous owner installed a coleman slim line HVAC unit on the roof. It runs off 120 so I can plug in and power it up from shore power or run the generator and use it. Either way, its a 15000 btu system and more than enough for my needs. If I do end up...

Wow, This looks great. Its been a slow roll for me. Too many little project getting in the way. Every time I get one done, 3 others pop up as a result. Tedious stuff. I ended up pulling my Hoseline out all together. Have a stack of stuff if anyone is interested. Interested in what you find out...

as thick as the frame rails and as little of an area it is, I am thinking I should be ok. Live and learn. I've had a 5th wheel hitch welded directly to my frame rail in an F250 and towed 12K to and from Cali without issue. I've seen other applications welded to frames before so I hope or think I...

My welds are not great by any standard but they are pretty solid. I am going to trim the bottom few inches off the bracket to get it flush with the frame and it should be good. Learning as I go is a painful process.

I found this link

Had a pretty decent weekend to do some work. Had been racking my brain trying to figure out how to mount the ASME propane tank I originally purchased. There was a space under the drivers side crew cab door step that housed a compressor and a tank that was just about perfect so I started pulling...

what about the little door from the cab to the box? keeping open or blocking off as part of your shower install?

are you blocking up the rear pass thru?

For all that 1x1 aluminum- did you weld all that in or screw or rivet?

looking good. I like the fridge location. Is that a 3 way unit?

Got busy this weekend. Removed the 12v hoseline unit and the roof components. Question- for those of you that removed the unit, I had lines to and from the box up under the hood, connected to (I'm not really sure what). If I just remove the lines and cap it, disconnect the electrical...

are you eliminating all of the flasher light locations and blocking them over? I noticed you pulled all of the wiring for them. Where will you be moving your electrical panel and wiring to? or is that completely eliminated?

oh the spiral of thought I have been on... After the stunning realization that the propane tank was rife with unforeseen complications related to filling and the fact that I was not able to move the exhaust like I had planned, I abandoned the ASME tank. I couldn't find a suitable place to mount...

Camco travel toilet I decided to go with something a little more low tech. Camco travel toilet with removable cassette. Have not used it yet but will let you know. https://www.amazon.com/gp/product/B074YW746P/ref=oh_aui_search_detailpage?ie=UTF8&psc=1