Recent content by kjcummins

DM'd you my buddies contact info.

Still available? I have a friend that might be interested but wanted to see if it was available discussed it with them.

Found a pair.

I actually don't want the NATO straps, I have scepter cans but thanks for the offer.

I am looking for two AT Overland(or similar) Can Holders. I have scepter cans but I am not against getting new straps if they have the ones for NATO cans. Just not looking to spend $200 a piece if there is some used ones out there.

Pm sent!

To say it's going well...

The day I brought our 1996 Shadow Cruiser home...only took about 4 hours to get it loaded. The two rear corners were rotten and the jacks were pulling away, the previous owners had it tucked back in a barn on a slant and had the jacks beyond extended and the truck still wouldn't fit under...lots...

Someone had previously repaired a corner on mine and they put the corner bracket back in the wrong way...so when the tension was off the and the roof removed, it was point about 30* towards the ground vs how it should be pointing up. This caused the whole roof to shift to the pass side when it...

To reinstall, I have seen people either use angle iron from like an old bed frame or some plywood like what is under the mounts to begin with(the little spacer piece between the bracket and the frame of the roof) attach those to the corner brackets but extend those so they are long enough to...