While I cannot speak directly to the Skycamp tents that you referenced, I do own and regularly use a Tuff Stuff Alpha 4 tent ( which looks like an Ikamper Skycamp clone). I am 6’9”, and find it to be plenty spacious for two people, or more. I easily sleep lengthwise, and can sit up in bed. While...
Complete yearly sets. 5 issues/year, 8 years worth, 40 issues total. All have been read and handled, still good overall condition. From a pet/smoke free house. Pickup in Flagstaff, AZ. ***SOLD***
2014-2021
***SOLD***
Used InReach RAM compatible cradle mount: $25 shipped to you. This is the non-powered version, but you can still attach a micro USB charging cable. I used it with a 1st Gen inReach, may fit 2nd as well (?). 1" RAM ball mounted to the back of the cradle, to use with a RAM mounting...
***7/14/20 Update: SOLD***
December 2018 OVRLND camper #006. -Camper will fit all 2nd and 3rd gen Tundra Double Cabs, and with minor modifications will fit some F150's
External bed dimensions are: 79 3/4" long, 70 1/2" wide.
Interior height 7'1"
dual ceiling vents -one a Fantastic Vent, the...
I lost about 3 mpg. Pre-camper I had a RTT that was nearly flush with the cab and averaged 15.5 mpg on a 4500 mile road trip over mixed roads, lots of Hwy too. I average about 12.8 now with the camper: 2k-7k elevation, 73-79 mph Interstate speeds.
Taking the camper on and off can be done by 3-4 strong (and tallish) people. I still consider a corner jack system (like the Reico Titan jacks on my 4wc) to make it a one person job.
Because of the light weight, I really only notice the camper in my rearview mirror, and at the gas pump. It...
It is basically bare, since I still use it as a pickup truck was intended (from time to time). I have a flip up table on the passenger side, and I am building a shelf for a portable power pack that will fold down on the driver's side. I have a spray-in bed liner, and a rubber floor mat for...
@highdesertlandworks , with the sleeping bed stowed, the entire truck bed is available, 4 chairs could probably fit in there. The sleeping bed is 67"x84". Almost California-King sized. But, I'm a tall guy, so everything was made to fit!
It is a screw-in ball mount. It provides the base for attachment of the adjustment arm. I used the suction mount on the windshield for the inReach, and a screw-in RAM mount for the tablet/cradle/arm mounted to my center console.
Thanks for your interest!
I have a DeLorme/Garmin InReach Explorer GPS satellite communicator unit for sale:
-InReach Explorer unit (Dec 2015 purchase)-SOLD
-Adjustable 4" RAM mounting arm
-Suction RAM windshield mount
-Mounting cradle for inReach
inReach Mounting cradle, 4" arm and a RAM suction mount still...