Recent content by Ramdough

Sold! Thanks for all of the kind words everyone.

Sale Pending. Thanks everyone for looking. Hopefully it will be at its new home next week.

Looking back through the “walk through”

The insulation is 2” and the skins are 1/8” fiberglass. Windows, doors, and hatches are Tern Overland. Windows are double pane acrylic. 58 gallons diesel with extra gauge mounted for planned 100gal primary tank. There is a 40gal grey tank installed with room designed for 125gal fresh...

I have some left over panel material. You could install a plug and overlap the fiberglass. Or, the holes could be enlarged to make larger windows or turn them into hatches. You could make one of those hinged walls. There are options depending on what is needed. You could also put a...

Please refer to this post: Post in thread '6X6 Expedition Rig' https://expeditionportal.com/forum/threads/6x6-expedition-rig.247315/post-3208833

I have heard rumors on the good and bad things with Acela, but I have no first hand knowledge. This truck has ~5,000 miles on it. So I would say it is barely broken in. A lot of rubber parts are replaced and it runs great. I would imagine I have done more soundproofing than they...

That was the plan, but you could reconfigure if needed.

Sold! Thanks for the interest.

That’s an extension of the cab. That allows a giant “walk through” instead of a “crawl through” for access to the habitat. The original truck had a gunner’s turret there. This design takes advantage of the existing cab hole.

I am having trouble uploading pictures. Please bear with me…..

2002 Toyota Tacoma Double Cab TRD 4X4 Former Overland Expedition Vehicle build. Truck was never used for expedition travel, but was built to handle it. Front Bumper is an ARB bumper with CB radio antenna mount, Lightforce Lights Off-road Spot Lights, and Explorer side lights. Custom rear...

Here is the tire carrier in more detail. Each tire is mounted on a swing arm. I have a small Warn winch that lowers the tires to the ground. There is a pulley also aligned to the rear for adding a bike lift using the same winch. Simply pull the pins and move the cable. I have two 2”...

A couple photos for the slide out deck. The platform is fiberglass with boat deck foam on it for comfort. The ladder can be moved from the standard location to the front in case you do not have the room next to the truck or there is a drop off. In one camping location, the ground dropped...