Recent content by seatoskyexplorer

Small DIY project to make filling the water tank easier and less prone to spilling water all over the camper. Ordered a second water tank cap and drilled a hole in it to accommodate an RV water inlet. Then made a nut out of a PVC cap that I drilled to size.

Currently facing the same issue right now. It definitely seems like a design flaw with the tank. My tank hasn’t been used since November and I’m going to sterilize it this week. In terms of getting the small amount of water out of the bottom I was thinking of disconnecting the breather and using...

Nice, that actually sounds pretty close to how I want it set up. Who installed your camper / did the installer provide the regulator hose to female quick connect?

Anyone have a parts list / info on converting the propane line for the Dickinson heater to use a quick connect? Seen a few people with that setup, but I'm not sure where they have the regulator located. Ideally I'd like to also add a splitter so I can hook up a stove / bbq without disconnecting...

Hey - saw your build post in the ACCC thread and noticed you specifically mentioned the hammer hangers. I am looking at adding them to my build but wanted to ask if you wheeled the truck with the camper on prior to adding them? If so, what was the main area / style of driving you noticed...

Did you get the large size in the rakattach 2.0? Do you have a high clearance bumper? Seems like it should work with a bumper that has an integrated hitch which would be ideal.

Mine feels good on the highway, only noticeable difference is a tiny bit more body roll when cornering at high speed, otherwise it’s smooth. A shaky feeling could indicate a tire balancing issue, I have experienced that in the past. Have you recently rotated your tires and if so, has it become...

Nice, thanks for the info. That system looks ideal.

Anyone have a nice simple solution to keep the external water tank tap clean and secure? I’ve looked at a few RV faucet options and also soft velcro covers - the RV options are a bit more complex than I need and the soft covers seem too flimsy / insecure. Some kind of locking hard cover would be...

Anyone know where this dust is coming in from and how to seal it? I used foil tape and silicone under the plastic bedside caps before the camper was installed, so I don’t think it’s the holes in the top of the bedsides. Are there larger holes under the bed rail on the third gen Tacoma?

Awesome, thanks for that!

Anyone know what the plugs on the bottom back side of the Alu Cab water tank are supposed to look like? The shop that installed my camper forgot to put the plugs in the back side of the tank so first the first time I filled it, my camper ended up full of water ? It’s been difficult to get the...

Ok thanks! Had a few issues with the installer and wanted to confirm that the heater was working as expected.

Dickinson heater owners - do you notice a significant different between low and high setting? The flame looks almost identical to me.

Interesting... How did they end up fixing it?