Search results

great looking build.

cwadej That a great looking set up . looks like it very good way to keep the Weight down by not having a cover . like that you don't have to remove two things to have a open trailer

Great looking frame

On the first two trailers the front tops have a 24'' radius top corners. Using a square to find where the radius begins

After many starts here I go . As the first trailer that I'm starting is a Serro Scotty Sportsman Jr style. The parts that I will be using are 2 ea R24'' , 1 ea R48'' that will be cut in haft & 30 feet of top flange. #1 Find where the flat to curves mark is .There a dot you have to find...

rear hatch I need too find out how tall the rear hatch is on a Serro Scotty Sportsman Jr . When I lay it out it seams to small it can only be 27'' high. If I make a sharper turn I can get a 32'' high hatch opening

Doing the Scotty Sportsman Jr.style. I don't' want tight bends . So will be using six R24'' curves .When I do a benroy it will have R24''in the front. I have been ask to build 2 more Jr.style shells. so I built a jeg . I can just drop and go

thanks for informashson Thanks for information . I plan to copy what you have done with the multi-axis hitch very clean

Serro Scotty Sportsman Jr.style Serro Scotty Sportsman Jr.style I had about 20 minuets laying out the three curves . There R24'' from a Modular fiberglass component kit. So any 1/8 ply wood will bend around the roof line. Used a full R24'' for the front top . On the back end 'just trimmed two...

What he said :ylsmoke:

Rhino Linings Deep Seal Epoxy with Hardener 3163with 10%-15% thinner. This combination will yield a 100-150 cps mixed viscosity (water) The hardener is cycloalphatic type which will also yield a water clear finish I have been holding off getting started on my builds I need a few more Modular...

Driving 75mi one way .One day a week gives to much time to think. It's seams most small trailers have just strait line's tided to curves. The manufacturer of the fiberglass Modular fiberglass component kit will make tabs for 3 trailers . So I will go with some thing like these trailers .I...

pro15 bonds to rust it is a waste of money if there no rust. I go fishing With a power coat shop owner. Said power is the worst thing for off road will let the metal rust through and not show. Will get hair line cracks and rust .Paint is easy to fix

I believe by using the R24'' and R48'' and a 90% you have a lot of teardrop shapes choose from. . by using just the R24 & 48'' You can do the BEENROY With the 90% you can do the box trailers.

If i was going to build a fast trailer I do a round trailer with 6 ea R48 and a hf trailer Something like this HOBBIT HOUSE

It seams I can't get any thing right .The axle is to short .I was going to use a full 48'' wide ply wood. To have a 56'' trailer. This trailer will be 52'' wide. I got the R48 & R24 corners & 90%. .I feel that will let the ply bend the easiest . With the Corners I have. There a lot of shape I...

As the only supplier of fiberglass sandwich panels in North America you may need to look some more

I got mine from Rockwell $235.

The rough looking fiberglass is where the mat and woven fabric over ran the mold . Will flip and get pictures and you can see when I go back this weekend. I think I tore and cut off all the mat and fabric that had no resin on it to do all my joints

I have started my Ailette trailer . I looked to see what this small trailer with no doors just has room for a bed. Thinking I should be able to build for 1/2 the price. I was shocked to see what there selling for. One over sea the Sleeper was $ 3700. + shipping it came to a little over $5000...