Search results

Mine did, mostly when temps got above 80 degrees F. Last month I both the exact model and installed it with the required 1Amp inline fuse (which wasn't installed by Obi) and have not had it go off all summer. My theory is that plastic fumes or adhesives from the manufacturing process reach...

It turns out that it just looked like a rivet. It was a screw with a rivet head but with a hex hole for an allen wrench to unscrew.

Has anyone else with a D15 found that the cover plate to the Renogy inverter's end plate is riveted to the body (on the side that is facing the Truma?) I needed to get in there to see if the breaker was tripped and found that only 4 of the 6 screws were in place; the other two were riveted...

Thanks. I was doing a battery test on some LiFePo4 batteries I installed and had a draw coming from the AC plug and the batteries went to zero WAY before I expected based on the draw showing up on the panel. I calculated the wattage on the AC circuit and converted to 12v amps to add to the...

Does the main panel showing the draw/demand amperage only apply to 12v circuits? Meaning it wouldn't show 120v draw coming from the inverter?

Appreciate the tip and will give that a try today.

I'm just trying to get them to send be an equipment list of the components shipped to the retailer on my D15. The ICECOE VL90 fridge is shot; won't get below 45 degrees F on a cool night. ICECO won't cover compressor unless I have a Proof of Purchase; but my retailer's bill of sale doesn't have...

I have the same happening on the driver/rear roof latch.

I just got back from a 2K mile trip down south and I'm getting better at speed control in interstate traffic: I only had a few rocking situations that I had to tame. What really requires my attention now is going over rough patches when traveling at 60mph or higher. The bridge overpasses in...

After testing the amperage coming from the Dwellers Anderson connector, I rewired the Anderson connector on the fridge supply line: I got two new leads and did a proper flood solder instead of a crimp. I also noticed that the Anderson connectors weren't "clicking" together when plugged in. I...

Yes, 8 hours before loading it with refrigerated food, I got it down to mid thirties.

Just got back from a trip with the D15 down in the Southeast US and experienced cooling issues with my ICECO VL90Pro. The first day when the temps outside were about mid 50's F, the fridge didn't get past 42 F when set to 27 F. Then as we got further south and temps were closer to 65 F, the...

McHitch servicing. Kinda helpful.

I see a colon as if you were posting an associated link to the product you purchased, but it's not rendering. Can you try again? Tx.

Pipe Camlock female Camlock male 40mm adapter Elbow Site editor butchered the links on the first try; hope this works.

Anyone find a use for the awning rails on the camp side of the Dweller? A while back an Opus dealer told me that Opus was coming out with a rear awning to cover the bed fold out on the Opus that's very similar to the Dweller's config. I was hoping to be able to use these for something. Maybe I...

Anyone have problems with the little sliding plate on the fresh water cap's lock? One of mine won't budge unless I pry it with a blade: Tried a bit of lubricant, but it didn't do anything. The internal spring still seems to work, because it'll slide back. It's just that a key won't move it out...

So far, I've only used it to refill the toilet water reservoir and rinse off some beach sand.

Or which of the dozen keys opens which door.

Update on my skylight leak. It looks like they used regular caulk around the housing instead of self-leveling lap sealant; probably because they didn't want to interfere with the skylight lid closing. The caulk was definitely lifting up from the roof. The part attached to the plastic housing...