Search results

  1. Bris31

    FG's in Action

    Video of 3x salt lakes on southern side of Canning Stock Route (Western Australia) that our 3 vehicle group passed by in June 2023 (with AI narration).
  2. Bris31

    FG's in Action

    Few memorable sections in our 2023 trip - long dense tree sections on Connie Sue track, driving along Aerodrome Lake & Crossing Savory Creek on Canning Stock Route (Western Australia).
  3. Bris31

    Wanted 5 stud wheel 16x8" for Mitsubishi Canter

    Need alloy or steel New or old.
  4. Bris31

    Wanted 5 stud wheel 16x8" for Mitsubishi Canter

    Still looking for it.
  5. Bris31

    Wanted 5 stud wheel 16x8" for Mitsubishi Canter

    5 Stud Size: 16x8K (for 315x75 R16 Tyres) Load rating 1800kg Offset 105 5'DC 5x208mm PCD See attached photo is perfect match.
  6. Bris31

    2007 FG140 Overheating

    One of the waterless coolant manufacturer mentioned about possible issue as below to be aware of - wondering if it would be of much concern. With waterless coolant, the engine will continue to run fine with restricted airflow, although it is possible that the plastic parts in the cooling...
  7. Bris31

    FG's in Action

    1850km (1150miles) long Canning Stock Route in Western Australia - was once the longest and remotest stock route in the world. Now it is icon in Australian 4WD culture, with 900 dunes, washed up & corrugated rocky track and no help available on the way, it is real test for man and the machine.
  8. Bris31

    Air bubbles in transfer case oil

    I would like to know on behalf of my friend's FG84 2010 presence of air bubbles in transfer case oil, otherwise oil is absolutely clear when bubbles clears in about an hour. Gear box oil have no air bubbles and clear. Oils levels were being investigated because of a presumably shuddering noise...
  9. Bris31

    FG's in Action

    Connie Sue outback track in Western Australia - it is about 650km long rough narrow gravel track passes through the Great Victoria Desert and its pristine arid landscapes.
  10. Bris31

    Engaging 4WD High without locking hubs (FG649)

    Guys, I have front LSD (ATW) and today I changed the LSD oil with premium mineral 85W-140 with Limslip. My intention was to lubricate the front diff so decided to have a short drive around the block. As it is all bitumen here, I didn't lock the hubs and tried to engage 4WD High lever while truck...
  11. Bris31

    FG's in Action

    June 2022. Crossed Great Central Road 1130km (700Mi) of dirt track between Laverton (Western Australia) to Yulara (Northern Territory). It is part of the Outback Way. It's Australia's version of the United State's Route 66. This gravel track is mixture of clay top, corrugation, sandy, rough...
  12. Bris31

    suspension suggestions

    Camper looks nice on SWB shorty. But just curious about camper door location on driver side in US.
  13. Bris31

    new owner of Fuso

    Congratulations! Planning is half the fun. Good luck.
  14. Bris31

    (FIXED) Canter FG649 (2003) clutch pedal is free

    FIXED (fingers crossed): After a tip from a panel beater- opened 2 main bolts to the bracket and removed the in/out pipe. Then loosened the 'push rod' with a pliers jammed on the grooves which are just behind the locknut (it found to be too tight). I was told these grooves are meant for this...
  15. Bris31

    (FIXED) Canter FG649 (2003) clutch pedal is free

    New master cylinder coming next week. Yes, I intend to have same old measurements of push rod length etc on the new master. Maybe cutting a small window on the front panel will help with installation for my big hands? ;) It looks so simple but needs lots of patience and reach. Wonder how do...
  16. Bris31

    (FIXED) Canter FG649 (2003) clutch pedal is free

    Just a thought, if rubber seal is buggered, shouldn't be oil would be leaking out all over?
  17. Bris31

    (FIXED) Canter FG649 (2003) clutch pedal is free

    Great, I could check master cylinder rod moving when clutch pedal is pressed - without removing master cylinder. So looks like seal is at fault as Dan mentioned. Will get a new master cylinder to replace.
  18. Bris31

    (FIXED) Canter FG649 (2003) clutch pedal is free

    Dan, thanks for quick reply and tip about removing the air lock. Would it be much easier to change the CLUTCH MASTER CYLINDER ASSY, than repairing the rubber seal? The whole thing cost only $116 at Brett. Also I was thinking before removing the master cylinder, I remove the clevis pin from...
  19. Bris31

    (FIXED) Canter FG649 (2003) clutch pedal is free

    This morning after a week of truck sitting idle, started the truck and found clutch pedal is free i.e. it goes to floor freely and doesn't return. Did some basic troubleshooting:- Found no oil leakage anywhere - inside cabin or on ground below. Brake oil level is same as before this problem and...
Top