Dumb question, but here goes.
I'm replacing all of the brake lines on my 03 E450 ambulance conversion. I pulled the old ones off w/out taking any photos, thinking it would be pretty straight forward, but I don't recall exactly how the center flex line was routed. The replacement looks exactly like the hose I pulled off (pictured below), but I'm not sure where the lower left hose ends are routed.
Here's what it looks like under the truck. From what I recall the fitting at the blue arrow bolts to the axle and T's into the hard lines going to each side.
Maybe someone has a similar setup they could snap a pic. of? I have the service manual, but it doesn't seem to give a good image of this area. I feel like I'm missing something super obvious.
Thanks in advance!
I'm replacing all of the brake lines on my 03 E450 ambulance conversion. I pulled the old ones off w/out taking any photos, thinking it would be pretty straight forward, but I don't recall exactly how the center flex line was routed. The replacement looks exactly like the hose I pulled off (pictured below), but I'm not sure where the lower left hose ends are routed.
Here's what it looks like under the truck. From what I recall the fitting at the blue arrow bolts to the axle and T's into the hard lines going to each side.
Maybe someone has a similar setup they could snap a pic. of? I have the service manual, but it doesn't seem to give a good image of this area. I feel like I'm missing something super obvious.
Thanks in advance!
