Page 1 of 8 123 ... LastLast

Thread: Montero Gen 2.5 (NL) Capacities, Part Numbers and Specialty Tools List

  1. #1
    Join Date
    Jun 2012
    Location
    Santa Monica, CA
    Posts
    527

    Default Montero Gen 2.5 (NL) Capacities, Part Numbers, and Specialty Tools List

    **If you've installed a part and can confirm that it fits the Gen 2.5, please post the brand, part #, and a description of the part so it can be added to the list**

    ----------------------------------------------------

    Subsections:

    I. Capacities
    II. Part Numbers
    III. Specialty Tools
    IV. Additional Resources


    ----------------------------------------------------

    I. CAPACITIES
    *per 2000 Model Year North American Vehicle Owners Manual (Petrol Engine)

    Automatic Transmission ATF Dexron II (8.9 qt)
    ***Some Gen 2.5s may require Mitsubishi Diamond SP III transmission fluid depending on build date***

    Axle, Front API Class GL-5 (1.3 qt)
    >-10 deg F SAE 90, 85W-90, 80W-90
    -10 deg F to -30 deg F SAE 80W, 80W-90
    <-30 deg F SAE 75W

    Axle, Rear API Class GL-5 (3.3 qt)
    >-10 deg F SAE 90, 85W-90, 80W-90
    -10 deg F to -30 deg F SAE 80W, 80W-90
    <-30 deg F SAE 75W

    Brakes Brake Fluid Type DOT3 or DOT4 (as required)

    Engine Coolant Ethylene Glycol (10 qt)
    *includes .63 qt in overflow tank

    Engine Oil API SJ or higher
    Oil Pan (4.5 qt)
    Oil Filter (.32 qt)
    Oil Cooler (.32 qt)

    Fuel (24 gal)

    Power Steering ATF Dexron II (1.1 qt)

    Refrigerant (Air Cond.) HFC-134a (27 oz)

    Transfer Case API Class GL-4 (2.6 qt)
    SAE 75W-90 or 75W-85W

    Washer Fluid
    Windshield (3.2 qt)
    Rear Window (1.5 qt)
    Headlights (3.9 qt)

    Wheel Bearings, Front NLGI Grade 2 Multipurpose Grease (as required)

    Door Hinges, Back Door Hinges Engine Oil (as required)

    Hook Lock Catch, Door Lock Strikers, Seat Adjusters, Backdoor Lock, Parking Brake Cable Mechanism NLGI Grade 2 Multipurpose Grease (as required)

    ----------------------------------------------------

    II. PART NUMBERS
    *The following parts are confirmed to fit the Gen 2.5 Montero

    Axles
    To fit 4.90 gearing in rear differential you will need:
    MITSUBISHI MR124858 Gear Set, 4.90 Ring and Pinion (per grandpa)
    MITSUBISHI MB837842 Spacer, Pinion (to set pinion rotating torque with correct shim, per grandpa)
    MITSUBISHI MR580530 Oil Seal, Pinion (per grandpa)
    MITSUBISHI MR569391 Shim Set, Pinion Bearing, Front (to set pinion rotating torque, per grandpa)
    MITSUBISHI MR179440 Shim Set, Pinion Bearing, Rear (to set pinion depth, per grandpa)
    MITSUBISHI MB393471 Bearing and Race, Pinion, Front (per grandpa)
    MITSUBISHI MB837844 Bearing and Race, Pinion, Rear (per grandpa)

    Battery
    ODYSSEY 34/78-PC1500 Group 34/78 DT (AGM battery, top/side terminals)
    ODYSSEY 65-PC1750 Group 65 (AGM battery)

    Body/Exterior
    ARB 3434040 Bullbar, 97-00 Montero (needs some modification to mount, per grandpa)
    Kit# D12 (4crawler.com) 2" Lift Blocks, 2.5" dia. (set of 12, per eurosonic)
    Kit# 120002-1-KIT (trail-gear.com) Rock Sliders, 67" (sold in pairs, per eurosonic)

    TSMV33AA Snorkel (search eBay "pajero smv33a")

    MITSUBISHI MR230032 Handle, Rear Exterior (per Clem)

    GOODYEAR GY-WB765-20 Wiper Blade, Windshield, 20"
    VALEO 900-19-1B Wiper Blade, Windshield, 19" (per snare)
    GOODYEAR GY-WB765-16 Wiper Blade, Rear, 16"

    Brakes/Wheels/Tires
    WAGNER BD125515 Rotor, Front
    WAGNER BD125262 Rotor, Rear

    AKEBONO ACT530 Brake Pads, Front (ProAct Ultra-Premium, ceramic, per snare)
    NAPA UP-7412-X Brake Pads, Front (ceramic)
    RAYBESTOS PGD530C Brake Pads, Front **Despite RockAuto's Listing THESE DO NOT FIT Year 2000 Gen 2.5**

    AKEBONO ACT567 Brake Pads, Rear (ProAct Ultra-Premium, ceramic, per snare)
    RAYBESTOS PGD567C Brake Pads, Rear (ceramic)

    TIMKEN SET47 Wheel Bearings, Front (sold individually, 2 per wheel)
    MITSUBISHI MB526395 Inner Grease Seal, Front Wheel Hub (1 per wheel)

    265/70 R15 Tire Size, Stock
    33x10.5 R15 Tire Size, Aftermarket (up to and including this size fit stock rim, stock suspension, no rubbing)

    Cooling
    CSF 3050 Radiator (all metal, per TheMole)
    MITSUBISHI MB660735 Radiator Cap (per TheMole)

    GATES 22073 Radiator Hose, Upper
    GATES 22146 Radiator Hose, Lower
    MITSUBISHI MB890985 Radiator Hose, Lower (per TheMole)
    DAYCO D87788 Universal Molded Heater Hose (1 needed, cut to fit)
    DAYCO B87661 Universal Molded Heater Hose (1 needed, cut to fit)

    MITSUBISHI MD030763 O-ring, Under Plenum Coolant Passage Tube to Rear Water Pump Housing
    MITSUBISHI MD308723 Gasket, Water Pump Housing to Thermostat Housing
    MITSUBISHI MD308724 Gasket, Thermostat Housing, Top

    MITSUBISHI MD350415 Thermostat Kit (per twocommas)

    Electrical/Lighting
    PHILLIPS 9003 XPS2 Bulb, Headlight (X-treme Power, sold in pairs)
    MITSUBISHI MR283314 Bulb, Compass Gauge (2 needed)

    JDM Side Marker Lights, Front Fender (clear lens, sold in pairs, search eBay "93-05 mitsubishi proton side marker lights")
    MITSUBISHI MB943607 Socket Connector Pigtail (fits JDM Side Marker Lights, per BEG)

    MITSUBISHI MD350609 Alternator (100A, per twocommas)
    GATES 36238 Pulley, Alternator Tensioner (per SlimPickins)

    METRA 70-7003 Wiring Harness, Stereo (utilizes stock amplifier)

    Emissions
    DENSO 234-4738 O2 Sensor, Upstream Right
    DENSO 234-4742 O2 Sensor, Upstream Left

    FRAM FV350 PCV Valve (per twocommas)
    MITSUBISHI MD183547 PCV Valve (per TheMole)

    Engine
    NGK 7005 Spark Plug Wires
    DENSO 3174 Spark Plugs (Double-Platinum, per TheMole)
    DENSO 3395 Spark Plugs (Iridium Long Life, per twocommas)
    NGK 7994 Spark Plugs (Laser Iridium)
    **NOTE** TO COMPLETE SPARK PLUG/WIRE JOB YOU WILL ALSO NEED:
    MITSUBISHI MD 199282 Intake Plenum Gasket
    MITSUBISHI MD 149764 EGR Tube Gasket

    ACDELCO TCKWP287B Timing Belt Kit, No Water Pump Housing (per twocommas)
    GATES TCKWP287B Timing Belt Kit, No Water Pump Housing
    GATES TCKWP287B kit contains: Timing Belt, Timing Belt Hydraulic Tensioner, Tensioner Pulley, Idler, Water Pump, Water Pump to Water Pump Housing Gasket, Water Pump Housing to Engine Gasket, Upper Coolant Passage O-ring
    **NOTE** TO COMPLETE TIMING BELT/WATER PUMP JOB YOU WILL ALSO NEED:
    MITSUBISHI MD030763 O-ring, Under Plenum Coolant Passage Tube to Rear Water Pump Housing
    MITSUBISHI MD308723 Gasket, Water Pump Housing to Thermostat Housing

    MITSUBISHI MD372536 Camshaft Seal, Front (2 needed)
    MITSUBISHI MN176208 Camshaft O-ring, Rear (2 needed)

    MITSUBISHI 1100A141 Crankshaft Bolt, 3rd Version (earlier versions are obsolete, prone to failure and should be avoided)
    MITSUBISHI MR994412 Crankshaft Bolt Washer
    MITSUBISHI MD372249 Crankshaft Seal, Front

    SMP INTERMOTOR PC96 Sensor, Camshaft Position
    AIRTEX/WELLS 5S1858 Sensor, Crankshaft Position (per nwoods)
    SMP INTERMOTOR PC191 Sensor, Crankshaft Position

    MITSUBISHI MD303148 Valve Cover Gasket (2 needed)
    MITSUBISHI MD198128 Valve Cover Spark Plug Tube Grommets (6 needed)

    MITSUBISHI MD149764 EGR Tube Gasket
    MITSUBISHI MD199282 Intake Plenum Gasket
    FEL PRO MS95709 Intake Plenum Gasket (includes upper and lower, per TheMole)

    PUROLATOR A35050 Air Filter
    STP SA7605 Air Filter
    WIX 46308 Air Filter (per TheMole)

    FRAM XG9688 Oil Filter (Fram Ultra)
    MOBIL M1-104 Oil Filter (Mobil 1 Extended Performance)
    NAPA 7092 Oil Filter (Napa Gold)
    PUROLATOR PL14459 Oil Filter (PureOne)
    WIX 51334XP Oil Filter (Extended Performance, per snare)

    NAPA 25-9365 Belt, Air Conditioner
    NAPA 25-050446 Belt, Fan/Alternator
    NAPA 25-040390 Belt, Fan/Power Steering

    Fuel System
    PUROLATOR F45057 Fuel Filter

    MITSUBISHI MB571603 Fuel Gauge Sender, In-tank

    Interior
    CABELAS IK-521945 Seatcover, TrailGear Front Bucket (sold individually, per nwoods)

    Steering
    MOOG K9753 Ball Joint, Upper (right/left are same part #)
    MOOG K9755 Ball Joint, Lower Right
    MOOG K9754 Ball Joint, Lower Left

    MOOG K750292 Sway Bar End Link, Front Right
    DEEZA MSL127 Sway Bar End Link, Front Right (per TheMole)
    MOOG K750291 Sway Bar End Link, Front Left
    DEEZA MSL128 Sway Bar End Link, Front Left (per TheMole)
    MOOG K9232 Sway Bar End Link, Rear (right/left are same part #, per TheMole)

    MOOG K90635 Sway Bar Bushings, Front (non-adjustable suspension, sold in pairs, per TheMole)
    MOOG K90631 Sway Bar Bushings, Rear (non-adjustable suspension, sold in pairs, per TheMole)

    MOOG K9751 Idler Arm
    MOOG K9752 Pitman Arm

    MOOG ES3387RL Tie Rod End, Inner (right/left are same part #)
    MOOG ES3386RL Tie Rod End, Outer (right/left are same part #)

    MOOG SSD99 Steering Dampener Kit (per billygoats)

    Suspension
    KYB KG54302 Gas-A-Just Shock Absorber, Front
    KYB KG54303 Gas-A-Just Shock Absorber, Rear

    KYB 565024 MonoMax Shock Absorber, Front (per TheMole)
    KYB 565025 MonoMax Shock Absorber, Rear (per TheMole)

    OLD MAN EMU OME938 Rear Coil Springs, Expedition Duty (sold in pairs)

    Transmission/Transfer Case
    WIX 58884 Transmission Filter Kit, Automatic (includes transmission pan gasket, filter and filter gasket, per TheMole)

    MITSUBISHI MD951858 Crush Washer, Automatic Transmission Drain Plug (per SlimPickins)

    MITSUBISHI MB580253 Bushing, Gearshift (per KyleT)

    MITSUBISHI MD701605 Bushing, Transfer Case Lever (red material, per All-Terrain)
    MITSUBISHI MR110334 Lever Assembly, Transfer Case (per grandpa)


    ----------------------------------------------------

    III. SPECIALTY TOOLS
    Spanner Wrench used to Remove/Replace Harmonic Balancer
    Made from 1/4" bar stock, 5/16" bolts for pins, 3/8" bolt for the pivot
    Attachment 147443

    Attachment 147429

    Spanner Socket used to Set Timing Belt Tensioner Pre-load (on eBay, search "mitsubishi timing belt tensioner tool")
    Attachment 147444

    Fits a 1/4" ratchet/torque wrench.
    Attachment 147445

    Spanner Socket used to Remove/Replace Front Hub Assembly/Wheel Bearings/Rotors
    MITSUBISHI MB990954 Factory Tool (link, per SONICMASD)

    Made from GM 3/4 ton 4wd front axle socket. Shave off four of the six pins.
    PERFORMANCE TOOL W1270
    Attachment 147446

    Attachment 147447

    ----------------------------------------------------

    IV. ADDITIONAL RESOURCES

    mitsubishilinks.com factory service manual, CAPS/ASA factory parts program ---> link

    4x4Wire TrailTalk forum ---> Mitsubishi link , Mitsubishi Diesel link , Mitsubishi Archive link
    Pajero 4wd Club of Victoria forum ---> link
    Pajero Owners Club UK forum ---> link
    Pajero Owners Club of South Africa forum ---> link
    Last edited by jlocster; 04-07-2017 at 05:43 AM. Reason: Fixed upper ball joint part #

  2. #2
    Join Date
    Nov 2007
    Location
    SoCal
    Posts
    8,778
    Yeah okay, so this pretty much should be nominated as Post of the Year!

    Wow man, this is awesome!
    "Occupy National Parks!" - gabepari
    ------------------------------------------
    TreadLightly! Trainer
    Wilderness First Aid certified
    KI6PFO
    Off Road Photography: www.nwoods.smugmug.com
    @4wdphoto on Twitter & Instagram

  3. #3
    Join Date
    Nov 2007
    Location
    SoCal
    Posts
    8,778
    So, for the total Timing Belt job, is this correct?:


    TO COMPLETE TIMING BELT/WATER PUMP JOB YOU WILL ALSO NEED:
    Gates TCKWP287B Timing Belt Kit, No Water Pump Housing
    Kit contains: Timing Belt, Timing Belt Hydraulic Tensioner, Tensioner Pulley, Idler, Water Pump, Water Pump to Water Pump Housing Gasket, Water Pump Housing to Engine Gasket, Upper Coolant Passage O-ring
    MITSUBISHI MD 030763 O-ring, Under Plenum Coolant Passage Tube to Rear Water Pump Housing
    MITSUBISHI MD 308723 Gasket, Water Pump Housing to Thermostat Housing
    MITSUBISHI MD 372536 Camshaft Seal, Front (2 needed)
    MITSUBISHI MN 176208 Camshaft O-ring, Rear (2 needed)
    MITSUBISHI MD 149764 EGR Tube Gasket
    MITSUBISHI MD 303148 Valve Cover Gasket (2 needed)
    MITSUBISHI MD 198128 Valve Cover Spark Plug Tube Grommets (6 needed)
    MITSUBISHI MR 994412 Crankshaft Washer
    MITSUBISHI 1100A141 Crankshaft Bolt, 3rd Version
    MITSUBISHI MD 3772249 Crankshaft Seal, Front
    MITSUBISHI MD 199282 Intake Plenum Gasket
    "Occupy National Parks!" - gabepari
    ------------------------------------------
    TreadLightly! Trainer
    Wilderness First Aid certified
    KI6PFO
    Off Road Photography: www.nwoods.smugmug.com
    @4wdphoto on Twitter & Instagram

  4. #4
    Join Date
    Jun 2012
    Location
    Santa Monica, CA
    Posts
    527
    That looks good nwoods. Also, unless you've already bought spark plugs and wires, don't forget those!

    In your case, think of what you're doing as 2 separate jobs.
    1--Front of the engine includes: timing belt, water pump, front cam seals, crank seal/bolt
    2--Top of the engine includes: valve cover gaskets, spark plugs/wires, spark plug tube grommets, rear cam seals

    Now, since the top of the engine will be apart/accessible, I'd also strongly recommend you replace both rubber heater hoses and the rubber coolant crossover hose at the rear of the engine.

    In that same vein, while the front of the engine is apart, I'd strongly recommend you replace your upper/lower radiator hoses, accessory drive belts, and thermostat.

    Please note I had originally mistyped the front crankshaft seal part #, it should be MD 372249.
    Last edited by jlocster; 07-24-2015 at 10:24 PM.

  5. #5
    Join Date
    Jan 2012
    Location
    Sacramento, CA
    Posts
    1,513
    Ill be doing my front end soon.. thanks you sir

    1994 Land Cruiser - HIPPO

    1998 Montero SAS work in progress - MONSTERO
    1992 Land Cruiser built (sold)



    IG: @STELLARBUILT

  6. #6
    Join Date
    May 2008
    Location
    Gilbert, Arizona
    Posts
    1,912
    Battery should be a group 27 though, a 34 is much smaller so might as well make the most out of having a big battery box. For AGM's you can get the marine deep cycle/starting combo batteries or for example the D27M.

    Also i still have the dude's number from TJM, I should call him and get the part number for the Airtech snorkel kit.

  7. #7
    Join Date
    Sep 2011
    Location
    Concord, CA
    Posts
    393
    Nice!
    Selling a Couple Reinforced Transfer Case Skid Plates in the FOR SALE Section.

    1999 Montero (Winter Package), 35/12.5/15 BFG mud Terrain KM-2s, 15x8.5 steel rock crawler wheels, 2" rear spring spacers, cranked torsion bars, 1.5" body lift, owner-built bumpers and rock sliders, Hella 500s, HID headlight conversion & Aussie Lokka front locker.

    My Gen 2.5 Build Thread

  8. #8
    Join Date
    Apr 2013
    Location
    Los Angeles, CA
    Posts
    58
    Want to confirm some items since I had similar work done to my Montero this week. Some non-OEM parts are from different brands than what jlocster bought. New items in RED.

    Spark Plug Job:
    NGK 7005 wires + (6) Denso 3395 (Iridium Long Life) spark plugs
    MD 199282 Intake Plenum Gasket
    MD 149764 EGR Tube Gasket

    Timing Belt Job:
    ACDelco TCKWP287B Timing belt kit with water pump
    MD 308723 Gasket Water Pump Housing to Thermostat Housing

    Valve Cover Gasket Job:
    MD 303148 Valve Cover Gasket (2)
    MD 198128 Valve Cover Spark Plug Tube Grommets (6)

    Other work you can do if you're doing the first 3 jobs:
    1100A141 Crankshaft Bolt, 3rd Version (Note: this was recommended by Mitsubishi because the earlier ones are not as reliable)
    MD 372249 Crankshaft Seal, Front
    MD350415 Thermostat Kit
    MD 372536 Camshaft Seal, Front (2)
    MN 176208 Camshaft O-ring, Rear (2)
    M350609D Mitsubishi Alternator (Note: according to the forums, if you get a non-oem alternator you may have 3 lights come on in the dash intermittently: Battery, Brake, and A/T lights)
    FRAM 228 FV350 PCV Valve (2)

    I paid about $700 for the parts and about $800 for all the labor. Time to go out there and break it!
    Last edited by twocommas; 08-13-2013 at 08:45 PM.

  9. #9
    Join Date
    Jun 2012
    Location
    Santa Monica, CA
    Posts
    527
    Thanks twocommas, added the following to the list:

    ACDelco TCKWP287B Timing belt kit
    MD350415 Thermostat Kit
    M350609D Mitsubishi Alternator (changed to "MD 350609," correct?)
    Denso 3395 (Iridium Long Life) spark plugs
    FRAM 228 FV350 PCV Valve (changed to "FRAM FV350 PCV Valve," correct?)


    sneakyninja, that'd be great if you could locate the Airtec snorkel part #
    Last edited by jlocster; 08-14-2013 at 02:08 AM.

  10. #10
    Join Date
    Apr 2013
    Location
    Los Angeles, CA
    Posts
    58
    Yup, you got it jlocster!

Page 1 of 8 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •