Kingsize24
Well-known member
I prefill them every time if it's a vertical filter, and even if horizontal I try to add some.
WOW, Thanks for the tips!!Not sure if yours is stuck from the electrolysis fit between the block and the aluminum distributor, or if yours is one with a stuck oil pump drive. I've had some twist slightly and lock them in tight, but if you have an air hammer you can try removing the lid and the center tab to peen on the steel shaft a few times to try and loosen things up. If that doesn't work, take the snap ring off the top of the shaft and slide the distributor body off the shaft, then you can work on removing the shaft and oil pump drive.