M416 Aluminum 30 lb Lid build

brian90744

American Trekker
Just started making a Lid for my M416, I found a truck fiberglass Tonneau cover, and cut it down to 51.25"x74" to fit the top of the M416. After I cut it to size it still weights 50lbs. IMO that's too heavy. I can walk on this fiberglass on top of the trailer, It would make a great RTT base. However I decided to use Aluminum 4" U channel .062 gauge for the outer frame plus 3 each 1x1"sq cross bars, had it tacked together to see how it looks and it weights 21lbs, I still got to get a .035 aluminum sheet for the top. This is a non weight bearing lid ( no RTT ), This trailer is to carry and for security my supplies behind my camper. Trailer build thread=http://www.expeditionportal.com/forum/threads/131046-M416-reconditioning-to-Army-Specs
 

Attachments

  • fiberglass cover 6.jpg
    fiberglass cover 6.jpg
    389.9 KB · Views: 120
  • alum top frt.jpg
    alum top frt.jpg
    420.8 KB · Views: 110
  • alum top rr.jpg
    alum top rr.jpg
    344.2 KB · Views: 101
Last edited:

Kiddmen57

Supporting Sponsor
Looking good! A nice and simple approach. Need a couple brackets to help mount the hinges? I have a couple of the ones I used.
 

brian90744

American Trekker
more done to top

Added 1x1 sq center cross bracing and test fit top aluminum. The top aluminum was purchased pre-painted white on one side. Next drill perimeter for rivits, seal and glue top to frame. add hinges and locks. Total weight with top and X braces as of now is 29lbs.
 

Attachments

  • alum top frt4 .jpg
    alum top frt4 .jpg
    449.8 KB · Views: 78
  • alum top frt2 .jpg
    alum top frt2 .jpg
    427.3 KB · Views: 67
  • alum top frt6 .jpg
    alum top frt6 .jpg
    422.6 KB · Views: 68
Last edited:

cruisertoy

Explorer
Looks good. I did the same thing with 3 x 1 1/2" aluminum tube...But I butted the tube instead of mitering it. I had a sheet of .25" thick ABS sheet kicking around so I skinned the top with that.
 

brian90744

American Trekker
Primed & painted top

Well, I sealed and riveted the Top aluminum to the outer frame, and used self etching primer, then Painted first coat of OD paint. Next Rubber seal between top and tub, add the hinges and locks. Close to finish,=brian
 

Attachments

  • primer bare metal.jpg
    primer bare metal.jpg
    343 KB · Views: 56
  • seal top tape.jpg
    seal top tape.jpg
    355.5 KB · Views: 59
  • OD paint top.jpg
    OD paint top.jpg
    477.9 KB · Views: 59
  • side locks.jpg
    side locks.jpg
    351 KB · Views: 54
  • decal m416.jpg
    decal m416.jpg
    387.2 KB · Views: 51
Last edited:

brian90744

American Trekker
More info on lid build

Started to add the hinges, however this is what the tub seal looks like, I think this will stop dirt and water from invading the interior of the trailer. What I like about this lid build is it light weight and no struts needed, I will be using a car hood rod to prop it open. I hope to finish this project in the next 2 days.=brian
 

Attachments

  • seal tub.jpg
    seal tub.jpg
    316.6 KB · Views: 56
  • IMG_0156.jpg
    IMG_0156.jpg
    385.2 KB · Views: 51
  • IMG_0159.jpg
    IMG_0159.jpg
    329.2 KB · Views: 54
  • IMG_0158.jpg
    IMG_0158.jpg
    337.6 KB · Views: 52
  • inside lid.jpg
    inside lid.jpg
    300.1 KB · Views: 61
  • seal top tape 2.jpg
    seal top tape 2.jpg
    368.1 KB · Views: 38
Last edited:

brian90744

American Trekker
Hinges and lift handle

Installed unpainted hinges and lift handle, Now to finish paint on the top, hinges & handle with the 2nd coat of OD, The hinges must be flat to fit side of trailer & lid. I followed Fiberglass M416/M100 Military-style Trailer Tub Kit thread= by JSCHERB post #392 (page40) to flatten the hinges, great idea, brian
 

Attachments

  • handle 2.jpg
    handle 2.jpg
    485.8 KB · Views: 47
  • handle 1.jpg
    handle 1.jpg
    431.5 KB · Views: 49
  • hinges on M416 2.jpg
    hinges on M416 2.jpg
    349.1 KB · Views: 55
  • hinges on M416.jpg
    hinges on M416.jpg
    328.2 KB · Views: 54
  • dolly wheel.jpg
    dolly wheel.jpg
    364.4 KB · Views: 34
Last edited:

harv3589

Adventurer
Mine is 1966 M416, when I was looking I just wished I could find one you have=NICE. I paid US$1400, and spent so far $ 650 plus my labor to get to this day. see my thread= M416 reconditioning to Army Specs. thanks for your interest.=brian l

I paid $1400 Canadian for my trailer and I'm into now many times over what u r and mine isn't close to being done. My lid cost me that to build alone...I can see the light at the end of the tunnel though!
 

brian90744

American Trekker
Finished=THE END

I finished painting the lid. No more mods required. I still have to install the auto(hood) lid support rod I got from the JY. thanks -brian
 

Attachments

  • handle & top painted.jpg
    handle & top painted.jpg
    461.5 KB · Views: 47
  • hinge painted.jpg
    hinge painted.jpg
    319.3 KB · Views: 44
  • rear look.jpg
    rear look.jpg
    356.2 KB · Views: 44
  • lid painted  THE END.jpg
    lid painted THE END.jpg
    404.2 KB · Views: 48
  • lid painted.jpg
    lid painted.jpg
    308.2 KB · Views: 41
Last edited:

brian90744

American Trekker
I did not know just how light my lid project would be? It's nice to open the lid with one hand. I had a taup cover previously and that was a pool of water if it rained.
see attached copy of a aluminum 58lb lid plans posted by GregB_00XJ back in 2012. "Click to enlarge"

thanks=brian
 

Attachments

  • lid20001.jpg
    lid20001.jpg
    246.7 KB · Views: 87
  • lid20003.jpg
    lid20003.jpg
    310.3 KB · Views: 62
Last edited:

brian90744

American Trekker
Lift top rods installed

Install final items= 2 Lid top rods,(car hood support rods) I installed one rod in the middle of the tub, and another at the rear so the lid is extra wide open.
 

Attachments

  • Open midldle rod 1.jpg
    Open midldle rod 1.jpg
    355.7 KB · Views: 38
  • middle rod 2.jpg
    middle rod 2.jpg
    300.4 KB · Views: 41
  • rear rod 1.jpg
    rear rod 1.jpg
    370.9 KB · Views: 44
  • rear rod 2.jpg
    rear rod 2.jpg
    444.5 KB · Views: 43
Last edited:

Forum statistics

Threads
185,540
Messages
2,875,670
Members
224,922
Latest member
Randy Towles
Top