How I calibrated my ARB Fridge

I don't normally leave the forum for blogs, but I'm glad I did this time. I didn't know you could tweak the reading in on the ARB, mines a couple years old, hopefully it will work.
Thanks for posting that up
Keith

Sent from my Passport using Tapatalk 2
 
Great writeup! Mine is off by 10 degrees and I put a cooler thermometer inside to confirm... now I can just calibrate it!
 
Thanks for the info. What is the display mode that comes up when the fridge is put into calibration mode? Mine started with A-6F
I just want to make sure its right.
Thanks
 
Thanks for the info. What is the display mode that comes up when the fridge is put into calibration mode? Mine started with A-6F
I just want to make sure its right.
Thanks

A-6F means you are already set down 6 degrees from default of A0F. Run the test I describe and find your calibration. You may be right on or you may need to adjust.
 
Does this re calibration stay in the memory even after it is turned off & unplugged ??? Or does it have to be done every time it is plugged back in ???
 
Last edited:
So, after raising my 82 qt by 6* in re calibration mode, this morning, the outside temp reading on cooler is fluctuating between dead on & 1* different, from the inside temp !!! Awesome.
 
Does this re calibration stay in the memory even after it is turned off & unplugged ??? Or does it have to be done every time it is plugged back in ???


??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????
 

Forum statistics

Threads
190,829
Messages
2,932,260
Members
234,630
Latest member
NMontanari
Top