bugeye1257's Build Thread: 2005 4runner Sport

bugeye1257

Observer
Well, I think it has come time to start a build thread here. I have been lurking this forum for a while and I thought, why not and share my T4R? I have had it for about 3 years now and have finally started to modify it lately, very surprising as I work for a Aftermarket Performance Whole Sale Distributor (Turn 14) and am surrounded by the scene 24/7. This thread is to capture my adventures with the 4Runner and log my modifications. Hope you enjoy!

- Suspension -

Toytec/Eibach front coil lift springs 620lb
ToyTec "Superflex" rear Coils
Toytec Front Top Plate Spacer (One - 1/4")
Toytec Sway bar relocates
Bilstein 5100 Series F/R set at 0
EMU DS trim spacer
Energy Suspension Front SB Bushings
Energy Suspension Rear SB Bushings
SPC UCA's

- Brakes -

Stoptech Front Rotors
Stoptech Rear Rotors
Stoptech Rear Pads
Hawk Performance Front 5.0 Pads

- Engine/Drive -
Koyo Replacement Radiator

- Wheels / Tires -
All Pro 1.25" Hub Centric Wheel Spacers x4
Goodyear Duratrac 285/70/17 LT E rated

- Interior -
Husky Liners Front and Rear
Weathertech rear Cargo Liner
LED Interior Lights
Cargo Barrier


Here it is the straight back from OK4WD after the lift install with my 265/70 General Grabber AT 2's

j8zes6.jpg


Current picture with the Goodyear Duratrac's 285/70

30ueid3.jpg
 

djtc

Adventurer
I have the same spring set up as you front and rear. However just swapped to superflex hd's, the ride is great. However I find the front a touch soft, especially when braking.
 

bugeye1257

Observer
I have the same spring set up as you front and rear. However just swapped to superflex hd's, the ride is great. However I find the front a touch soft, especially when braking.

With the hd's in the rear it might not be the best combo if it is unloaded in the rear. I can see it being a bit soft at times. However it is ten times better then blown out xreas struts!
 

djtc

Adventurer
With the hd's in the rear it might not be the best combo if it is unloaded in the rear. I can see it being a bit soft at times. However it is ten times better then blown out xreas struts!

right now I just have my storage drawers and the ride is really nice.
 

bugeye1257

Observer
Yep, now I know where ive seen your screen name before.

I follow your tundra build and now its making me want to buy all these lights for the 4runner.
 

bugeye1257

Observer
Nothing to new here, but I thought id share a iphone picture.

Pushed my liners in but still have to trim the front bumper. Rubs on the body when in reverse so a BMC will have to be done. Running boards will be coming off tomorrow.

2i8vnf8.png


1263gvo.png


4s1h6a.png
 
Last edited:

bugeye1257

Observer
Just some new images. Now without the running boards (Much better!).
Not too much new, just waiting on some 06+ headlights to come in!

2ibdfdj.jpg

ay6cs1.jpg
 

Forum statistics

Threads
188,039
Messages
2,901,491
Members
229,352
Latest member
Baartmanusa
Top