Anvil 2015 JKU Sport Overland Build
- Thread starter Yuke
- Start date
Yuke
Adventurer
Just got back from an epic trip to Cape Lookout. Full Trip report to follow. Here is a teaser or two.
jeep157 by Chris Yuknis, on Flickr
jeep158 by Chris Yuknis, on Flickr
jeep157 by Chris Yuknis, on Flickr
jeep158 by Chris Yuknis, on Flickr
Last edited:
Outside somewhere
Overland certified public figure brand ambassador
Wow!
Very cool rack! :beer:
Looks like you could park another Jeep on top of it.
Not a jeep but
https://www.youtube.com/watch?v=X4_m5Nfsr-g
As they don't give any specs on what it's truly rated for I was curious. After talking to people in the US and elsewhere I figured 1000 pounds was safe. I put the RTT on (tepui gran sabana/annex,180ish pounds?) and put myself and two buddies (another 660 pounds) on the rack and in the tent. Then put two loaded pelican boxes (another 150) on the front of the rack side by side. There was no bending in the rails at all and that's with just the slats the rack comes with so I'm a happy camper.
Yuke
Adventurer
Just some little things for now... I added a dual fast charge blue seas usb in the dash and a standard usb outlet in the rear that has one fast charge port.
jeep159 by Chris Yuknis, on Flickr
jeep160 by Chris Yuknis, on Flickr
jeep159 by Chris Yuknis, on Flickr
jeep160 by Chris Yuknis, on Flickr
Last edited:
Yuke
Adventurer
I also worked on adding in the ARB differential breather kit I had lying around for a while. Both axles are now routed to under the windsheild wiper cowl.
jeep161 by Chris Yuknis, on Flickr
jeep162 by Chris Yuknis, on Flickr
jeep161 by Chris Yuknis, on Flickr
jeep162 by Chris Yuknis, on Flickr
Last edited:
Comanche Scott
Expedition Leader
If your build thread is only on this forum, you can use post them right into here.
You could still do it, even if your build is on multiple forums, it's just a duplication of effort for each forum.
I like doing this, because the pictures are always right here. So if someone asks a question in another thread, I can reply and snag a picture from the file here to post real quick.
You could still do it, even if your build is on multiple forums, it's just a duplication of effort for each forum.
I like doing this, because the pictures are always right here. So if someone asks a question in another thread, I can reply and snag a picture from the file here to post real quick.
Yuke
Adventurer
Robbi Smith
Observer
Just some little things for now... I added a dual fast charge blue seas usb in the dash and a standard usb outlet in the rear that has one fast charge port.
Where did you hard wire these to, directly to the battery?
Sent from my iPhone using Tapatalk
Yuke
Adventurer
For the rear, its actually wired to one of my two switch pros setups.
For the front, quadratec makes a nice plug and play 12v splitter for the front outlet. Its pricey for what it is, but save you from splicing factory wiring.
Robbi Smith
Observer
So you have a switch pro in the rear of your Jeep? Do you have any pictures of this setup. Thanks.
Sent from my iPhone using Tapatalk