Xterrachris81
Observer
Its been a while since I've been able to work on the trailer (stupid winter) but I found some time to build my kitchen table. It's going to fold down off the side of the trailer
My new build
- Thread starter Xterrachris81
- Start date
Its been a while since I've been able to work on the trailer (stupid winter) but I found some time to build my kitchen table. It's going to fold down off the side of the trailer
Xterrachris81
Observer
I set the table up and clamped it down to see how it looks/fits... I'll bolt it down and snap some pics of the hardware in the next couple days
Xterrachris81
Observer
Almost done with the table. Just have to finish the legs
Xterrachris81
Observer
Trailer isn't done but it's ready enough for Ocala national forest in a couple weeks! 
Xterrachris81
Observer
Thanks buddy, you've got some pretty rad toys! Definitely interested in seeing how your trailer build continues!
JKChad
Observer
Nice build so far. I'm restoring a 4x6.5 my grandfather built about 30 years ago. would you care to share you axle width, hub face to hub face measurement? I'm looking to do the same axle with the GM 6x5.5 lug pattern to match my Tahoe. I'm planning to run a 30-31" tire. Probably gonna stick with a 235-245 width tire for now, but definitely want to be able to run a wider tire once I get another wrangler in the new year or so.
Xterrachris81
Observer
Hub face to face is about 61". I've got 31x10.50 15 bfg t/a ko's on it right now with 6x5.5 pattern hub that matches my xterra and my brand nused 1994 fzj80. I did lift the trailer about 6" with 3 inch blocks and universal adjustable shackles and I had to put 1/4 wheel spacers in there due to the width of the tires.