1 Bored Clerk's DIY Camper

1 Bored Clerk

Explorer
I'm interested in your prices, specs, etc on your boxes... if you don't mind sharing.

About $1800 for both boxes. Full custom to my specs/dimensions/door design. Three point latches for better security, 90 degree vertical door opening with dual lift struts, matching locks for both boxes, 110 degree seal flanges for better water proofing, bulb seals, .120” wall thickness, all internal latch mechanism covered with aluminum panels to keep stuff inside from fouling latch. Mill finish as I don’t like diamond plate and don’t want to deal with polished finishes. Oh, there is a drain in the bottom of the small box so we can hose out any sand, dirt, mud that may get in there as it will be our ‘locker’ for wetsuits, firewood, otherwise muddy stuff, etc.


Sent from my iPhone using Tapatalk
 

1 Bored Clerk

Explorer
Bunch of work done on the door:

cbaebd94dec49c8359d8ae89426cbef8.jpg

Recess for hinge mount plate

36d6fe8a871b67dc4e2c1b13ca80e8f8.jpg

How it fits

656c2d70b28e9d6ad1f4677509b41ecb.jpg

Epoxied in place

094cbce7e48abe7afbb0f022e560d0e8.jpg

Same done to the door panel.

Next is to get the door corners cut and test fit the door. Need to check for clearance and proper fit with bulb seal.


Sent from my iPhone using Tapatalk
 

Forum statistics

Threads
185,424
Messages
2,874,294
Members
224,720
Latest member
Bad Taste
Top