98 Build Esme

Greenbean

B.S. Goodwrench
Good looking 100 man!

Loving the Slee gear you have on there, and to boot it's grey!

Is that one of those eBay snorkels?

What else you have planned?
 

Trail-Tailor

Observer
Good looking 100 man!

Loving the Slee gear you have on there, and to boot it's grey!

Is that one of those eBay snorkels?

What else you have planned?



No Slee gear at all (rear has Slee influence). All made by me. Amazon snorkel, but think its the same as the Ebay one.

I have my TourFlex suspension on it. 3" coils for constant load. 45mm 9 stage adjustable shocks on rear and 53mm bore front. HD torsion bars with strengthening brackets.

ComeUp Seal Gen2 - 12.5 wireless remote

Need to install my rear tailgate panel. Dual 31 group batteries, custom build rear drawers, I have my Trail Tailor RTT and 270 awning for next spring.

Adjustable rear panhard
Trail Tailor diff drop
Dual fuel BBQ pit
Harrop front E-locker
Trail Tailor skid plates
Engel or Dometic fridge

misc other items


100 Installed CR.jpg

IMG_20160928_120722303.jpg

IMG_20160926_104753931.jpg

IMG_20161003_114630440.jpg

IMG_20161004_105923463.jpg

2.jpg
 

Trail-Tailor

Observer
Jason, the Hundy is looking awesome! I spy something in the pics above that I could really use. Sent you an email. By the way, I love the eBay snorkel and TEQ badge. Reminds me of my rig!



I'm working on them. Not letting the cat out of the bag just yet..

J
 

Trail-Tailor

Observer
Diff drop is done.

I'll get this. the adjustable panhard bar, RUCA/RLCAs installed in the next couple of days.

Ordered a front diff rebuild kit and Nitro UCA parts from Carl @ Just Differentials.

Jason

IMG_20161216_125716255.jpg

IMG_20161216_125750738.jpg
 

Trail-Tailor

Observer
Very cool stuff you have made! Are you selling rear bumpers for 100 series?


I'm no longer making bumpers. Just racks, sliders, arms, suspensions and misc other things. I'm trying to get a deal worked with Kaymar and Ozbar for a standard stock bumper offering.

For bumpers look at Costa Fabrications. Rich is awesome to deal with and one of the best fabrication guys I know. I refer most people to him now. He has a 100 in the works if memory serves.

https://www.facebook.com/Costa-Fabrications-842158609206475/


Jason
 

Trail-Tailor

Observer
Powder coated mounts arrived.

Hope to get the 270 awning up this weekend. Need to get started on the storage drawers too. So many little pieces to finish up.

Rear control arms are coming up soon too.

J

IMG_20170110_140737307_HDR.jpgIMG_20170110_142820592.jpg
 

Trail-Tailor

Observer
Finally getting around to installing my 270˚ awning. This is the prototype that I had made with my RTT. It has a full wall kit and floor as well. Been in my way in the shop for too long, time to mount this puppy.

I made some 1/4" stainless brackets today. Since the roof line is wider at the front I made one bracket slightly longer to help with the angle.

I'll get it installed tomorrow morning.

J

IMG_20170114_173114243.jpgIMG_20170114_173247891.jpgIMG_20170114_173301147.jpg
 

Trail-Tailor

Observer
Awning is mounted, playing with fabbing up some UCAs with ball joints, ordered a new starter. Other than that just pushing snow and working on sliders this week.

J

IMG_20170115_101745453.jpgIMG_20170117_110701941.jpgIMG_20170127_204558634.jpgIMG_20170126_123006650.jpg
 

Forum statistics

Threads
185,542
Messages
2,875,688
Members
224,922
Latest member
Randy Towles
Top