The DiscoDavis Sandglow Thread

El Solis

Adventurer
Bc my truck is better than your truck
Totally kidding as my truck is a lawn ornament at the moment waiting for parts
 

DiscoDavis

Explorer
Sierras: Bowman Lake to White Rock Lake, August 2017

Several months late in posting this item, this trip was the first major chance to get out and see how the cars would do living out of them and tents for a few days. No fancy roof tents or kit. Just a couple of cars and some old camping gear.

Day 1

27561850839_b78e23fe8f_b.jpg


Note: All photos by Z. Maclean, kind enough to bring film cameras along and develop/scan them. I am delighted to be able to share these.

24474683987_fd5eeca683_b.jpg


So:

We loaded up both cars the night before and set out early in the morning. Almost the moment the sun rose Little Red decided to blow its top out on the highway and our first unscheduled stop occured!

39309267912_8bcfb4ed68_b.jpg


39338483531_277cc85c47_b.jpg


Made it up to Grass Valley later that morning, then offloaded Little Red and started down to Edward's Crossing bridge. The road down roasted our brakes, which meant a wait and photo opportunities

39309265392_ecdfa473aa_b.jpg


39338481421_c8116672a8_b.jpg


From there we passed through Washington, swam a bit in the river there, and moved on down the road towards Bowman Lake

38630990754_091501169a_b.jpg


27561874769_3d2e5fdce4_b.jpg


38631081634_6b2c58f32d_b.jpg


27561870679_912d6dfa07_b.jpg


Stopped for a camel man action shot

38631080624_c56c7212ed_b.jpg


38461308565_1e8cb5f7d6_b.jpg


27561806879_7455199c6d_b.jpg


The road from Washington to Bowman is not hard at all but slow. Replace corrugations on any road with a thousand rocks just large enough to pound your shocks and it means you won't go very fast. At least we did not, maybe a jeep on large tires would. (Pictured: a nicer bit of that road)

27561809509_002cc74cf3_b.jpg


I wished we did more swimming then, but this trip was mapped in such a way that we were pushing hard to make each day's mileage on time.

39309257392_cc19198fc9_b.jpg


38631013854_2dc23c7386_b.jpg


It was quite nice summer weather, with a cool mountain breeze if that helps the imagination. Cold water however.

27561867439_2a5cae7ce5_b.jpg


38631019934_64e44157f4_b.jpg


38631022624_594fbbf122_b.jpg


39309256702_7f529731f7_b.jpg


From the lake we proceeded up to the ridgeline and then the next, before wandering through a part of the area that is being logged, and had just shut down for the day.

38461349415_c54cb582a8_b.jpg


39309251252_aea1118562_b.jpg


39309254092_3e35751c7c_b.jpg


We stopped again to ogle the stacks of timber and machines

38461355135_6e17804b78_b.jpg


38461356265_57dfcd0dc3_b.jpg


Leaving the logging area, we started to get hit with our first major issue: the radios. Both cars had handhelds with old and outdated nicad batteries which were performing terribly. One car had the charging unit, a large 90's design about the size of a toaster; which we used to hotswap batteries that kept dying out. Eventually even that couldn't keep up with our use, and we started having to yell or stop at every turn to check on things you'd otherwise relay by walkie.

Got a few ridges over and settled in a valley for camp 1. Everyone was tired and the sun had dipped down so halfway up a field in some trees we set up tents and ate hot dogs. 7/10 site.
 
Last edited:

DiscoDavis

Explorer
Got busy, lazy. Maybe the rest of the trip will go to the trip reports section, back to maintenance

Maintenance backlog December 2017

There was an issue where the center diff lock would not stay locked. Especially on difficult slippy parts it would pop out if you didn't hold it in. Pulled the tunnel piece and futzed with the linkage until the throw was right, put some wd40 in the articulation points.

40914376562_0718ce9a9d_b.jpg


40247510244_8f1674e7b5_b.jpg


40956357331_e075438e0f_b.jpg


26083960297_35fdbd1d4d_b.jpg


Roof lamps have a grounding issue somewhere, and sometimes pairs work while others do not, or pairs work but when one set is on another is dimmer... etc. First to pull the original wiring and unfortunately this must be replaced.

40956376821_ed371639f8_b.jpg


Interesting note, the "factory" special vehicles configuration would have the switches, relays, fuse box for the roof lamps inside the cab, where they would live behind the large switch box, see Shayne's car, huge box only a few switches originally. One of the first owners apparently had a god awful stereo install that moved the relays and fuse box into the engine compartment and rewired it substantially...

26083971547_afb850bb57_b.jpg


glass fuses, 35 amp for box input, 17 amp for each light pair, each pair has a relay (relays to the right in photo)

26083979697_71dc854848_b.jpg


Power wire from battery was god awful. Hodgepodge of brown alternator sized wire clipped and melted in places

26083982327_23ea77ea7b_b.jpg


Crimped together with a green/yellow wire in what can only be described as a screw crimp?

To be continued.
 

DiscoDavis

Explorer
Post January Desert Trip Notes 01/13/2018

We got back from a nice few days camping and driving around looking at mine sites around the Mojave. Two cars and four people, and I asked around every day or so for notes or suggestions about what we liked or did not like about how the 110 was set up. The only note I have for Joe's 90 is it needs a working heater ;)

One major item was interior power sources. We've been using a set of old reprogrammed sabers for years for car to car or person to person while camping or driving and in August it was clear that the batteries we use need to be retired, they would only last for one or two hours each and we would spend much longer trying to hot swap batteries out of a charger. Friend found these excellent chicom ebay special battery adapters that are basically just snap on fittings that instead of being a battery are just 12v plugs that go in the cigarette lighter socket.

26084203727_39216ac183_b.jpg


The problem is that the 110 has only one socket. One. With people needing to charge phones, cameras this means choosing to have working radios or working phones. Some days we needed one or the other, on most days we needed both, so it was a problem. After the trip ended, I got one of the Mud UK faceplates and few sockets and some wire and went to it. They have a lot of options!

40063203015_b69c880ccb_b.jpg


Factory face plate. See above it in the dash space that is where the full width camel light panel controls would go. Because of the old radio someone shortened the box and pushed it over to where it is now.

40247739894_4e6536df57_b.jpg


Mud UK faceplate above, 3 hole version with 2 12v and 1 double usb thing

40247740604_1829584dc0_b.jpg


Interesting that it has the cutout for the clock like any other production one ten

40956725181_98500336f0_b.jpg


Unplugged existing wires, and I actually just safed off the existing 12v socket wires, pwr, grd, light and taped them up in a bundle to be hidden if needed to reverse this change.

40956731041_16290a5968_b.jpg


40063440905_845609396f_b.jpg


swapped over the old wiper switch

40063214715_f61ef221e5_b.jpg


Ran brand new 12ga cable through to the dash for each socket, loomed and sealed outside of the dash to the accessory fuse box. You can see I did have to cut the opening to fit the new plate. Was not my favorite but if it needed to be reversed and the old plate fitted it is not visible.

40914768842_00e6b957a5_b.jpg


They have full time power but can only drain the auxiliary battery as it is isolated from the other while vehicle is not running. In the future they may be switched but it has worked for a few months now.
 
Last edited:

DiscoDavis

Explorer
Thanks guys, one of those compromises that needed to be made. Lots more to document, I forget to take photographs but should be able to explain what is coming next. Backlog includes:
>new rear shocks fitted for standard HD coils
>ran power to the back of tub
>added light for the back work space
>fitted new steering dampener, steering rod joint to swivel
>did cambelt
>new water pump to replace the britpart one that somehow soldiered on 5000 miles since last year
>rooflamps still have issues, disconnected for now until I decide how to attack originality vs functionality
>pulled old main diesel tank (tank to cradle junction rusted and leaked)
>new main diesel tank to go in and then clean sedimeters and fit a new fuel filter
>cleaning frame from time to time with pressure washers and by hand
>replacing all frame rigging eyelet bolts with new since one snapped on removal
>to pull the steering guard assembly and refit new hardware
>to service ball joint in steering drop arm (access occluded due to steering guard) its fine now but boot is ripped
>pulled a lot of the non original.... wiring from the frame. Someone should be slapped for the amount of sloppy and unprotected splices, cable runs I am seeing, bad, extraneous, live cable ran to nowhere, etc.. Re loomed some sections, retaped others and tucked out of the way. I don't claim to know it all but at least I can read a diagram and follow basic instructions from a book. At least rust is not a huge concern.

With the other cars it was more mod and go but with this one it is: remove questionable modifications and then pore over old photos and video to make it LR perfect factory or restore a piece that they cut apart or moved somewhere else.

Here's some material I've found, albeit blurry. 1990 demonstrations before the main event with the rare 127 comms truck and workshop unit, also pictured is part of the airlift in the An124's, even shows the interior loaded with discoveries. I'd like to see the 1988 workshop one ten show up here someday, I know someone in the USA has it.


and another feature showing the Ruslan, starting in 1989 the Soviets offered its use for unique commercial cargo transport needs, I hoped they might mention the 1990 camel airlift but they also do state that these were often used for Siberia heavy transport.


Last one: still on an aviation kick today, found two photos of two aircraft with the description:

"Getting airborne from Farnborough with a cargo of Range Rovers for the Camel Trans Siberian Rallye. Farnborough (FAB / EGLF) Mid 1980s [sic]"
-Ken Videan


0758579.jpg


0758578.jpg


More to come
 
Last edited:

DiscoDavis

Explorer
01/20/2018 Rear shock absorbers

41054161882_308fff2005_b.jpg


After the broken shock absorbers in the desert, a different rear set arrived to try. These are a standard pair as the car has no additional lift or taller coils, etc. Also got new axle bump stops (one fell off in the desert), and new flanged 19mm nuts for the top mounting bolt for each shock eyelet. Went on tight but otherwise normal. Axle stops needed new hardware, easy to find at local store.

40202792705_d05c5681e2_b.jpg


39288504310_caa17d9720_b.jpg


39288511810_56880c6322_b.jpg


40202819765_523077244c_b.jpg


Once they went on went into town to use a pressure washer and clean everything. Body roll is worse than with the OME's, but acceptable. On future radar is either the 130 inner helper springs or dual rear shock absorbers, or both. I particularly like that the body position and the eyelet structure is opposite from the OME orientation.
 

DiscoDavis

Explorer
01/22/2018 Rear electrics and light

Next on post trip suggestions list was power to rear of car. Had a box of components months before that were sitting around for a planned wiring run, when I was last in CH, outfitter Marc suggested welding cable as good quality and flexible for any amount of power you could ever need in a car.

Used
>2 ga welding cable, 25' sections of red and black ea.
>sealed marine lugs
>marine heat shrink
>0.5" marine loom (whatever was highest heat rating, found at marine store)
>Super 88 electrical tape
>zip ties

40387709684_e7b995abba_b.jpg


26226137997_027a73b684_b.jpg


27224812748_a5592c860e_b.jpg


27224560058_3c520b60b0_b.jpg


Got under the car three or four times measuring an exact, and then more generous run length to account for stretch, flex, pulling on the wire, then cut to size, approximately 15 feet of cable.

Fit sealed lugs, used a hydraulic crimp tool, then put shrink wrap over that, ran all the wire inside loom, and taped the whole length shut. After that it was just running the cable under the car, and securing it. I did have to drill one hole at the very rear of the tub in one corner, felt bad about it but there was no other way to do it and it can be capped if everything is removed.

Cable is fused at the battery with a 100a ANL, and where it comes up into the rear of the tub it enters a manual switch box that then sends power to a blue sea 6 slot fuse box. Both fixtures are just velcro'ed in and can be removed. The hole it passes through does need a grommet... working on it.

40387975354_51d59c0361_b.jpg


41097829971_356000b3f5_b.jpg


Wired in some pigtails as plugs for any future item. Plugs are deans. Easy assembly/disassembly, lighting changes, etc. Bit of a pain to solder (still learning to do a neat job)

39288700520_105c92a5b6_b.jpg


Did a wiring run from fuse box to the inside ceiling, a sealed section with plugs on each end, for a dome light.

40203083725_e7d37064ba_b.jpg


The larger black bundle is for the rear flood/reverse lamp

26226390137_338609688b_b.jpg


Dome light actually a map light with a red filter, was a good price on another order of items. If I want it somewhere else just unscrew the mount and unplug from the loom right there, move it somewhere else.

27224822088_429869d724_b.jpg


41054375312_bcc858b9d6_b.jpg


39288714970_a6f09644d0_b.jpg


And before anyone says "why not just use a billion LED strips?", I want it simple, small, and for now minimal power draw. This 6 unit fixture is just fine. I have several types of LED strips and am slowly experimenting with them for other purposes. "Better is the enemy of good enough".

41097847391_5fbffccc17_b.jpg


Bonus, top right is a field expedient that has worked quite well. Just a hammock hanging strap zip tied to the roll bar, hang dry bags and rope bags, rigging, gloves, etc. off it. Out of the way and away from leaky windows in rain storms.

39288725500_15d70d9e79_b.jpg
 
Last edited:

DiscoDavis

Explorer
Misc Feb 2018 work

End of winter and before spring it's time for routine yearly service

>air filter
>oil change
>fuel filters (not done yet)

40387893334_7cc85b3226_b.jpg


Next, items tend to shift around the back of the car and often blocked access or flew everywhere on bad roads. Made a little platform and got some of that alu cargo track. Dimensions are 36"W x 43" L

39288589420_ee067d7e34_b.jpg


40202936455_0ef6b65cf5_b.jpg


40387827044_bdf4e68c2d_b.jpg


With millimeters to spare it will fit 2x wolf boxes wide and a bit more than 2x wolf boxes deep longways with room for the door to close. Still need to locate bolts through the floor support cross spars and tie it into the tub but in the interim everything is lashed together in one giant pallet, better than all the little heavy pieces shifting.

40387830114_1cbf601cec_b.jpg


40202955305_3385e07187_b.jpg


26226293027_c80b671176_b.jpg


27224704058_a450549884_b.jpg


need to use chamfered bolts to maximize space, and getting the bottom nut and washer on with enough space is a bit tricky but it works, we trimmed the ends after.

39288627490_f1c4377ac6_b.jpg


40412576564_8d608aa75d_b.jpg


2 more wolf boxes replaced the one clear bin, water ingress became a problem and size not standard. Used stratchits to tie it all down, the rubber spring force on those is nice

26252238527_7b11b312a1_b.jpg
 
Last edited:

Forum statistics

Threads
185,530
Messages
2,875,584
Members
224,922
Latest member
Randy Towles
Top