just eric
Adventurer
In preparation for wiring of my ARB 50qt to my 4runner, I've been reading up on Anderson Powerpole connectors. I am a little confused and need some help.
Here's my plan: I already have the ARB fridge wiring kit. I'd like to wire it to the Anderson connectors housed in a Powerwerx PanelPole and install Anderson connectors on the business end of the fridge power cord. I would then like to install the PanelPole into a two hole panel mounting plate with a voltmeter.
My questions are these:
Sorry about the hyperlinks but I could not figure out how to insert the photos. And thanks for any help you can lend.
Here's my plan: I already have the ARB fridge wiring kit. I'd like to wire it to the Anderson connectors housed in a Powerwerx PanelPole and install Anderson connectors on the business end of the fridge power cord. I would then like to install the PanelPole into a two hole panel mounting plate with a voltmeter.
My questions are these:
- The Powepole web site indicates you should use the 75 amp powepole connectors. Can/should I use the 45 amp connectors that come with the panel?
- Will the ARB 8 gauge wire fit in the 45 amp powerpole connectors?
- What would be the best way to wire in the volt meter? Direct to the battery or can it be spliced into the 8 gauge wires?
Sorry about the hyperlinks but I could not figure out how to insert the photos. And thanks for any help you can lend.