Thread: Limb Risers For 5th Gen 4Runner

  1. #1
    Join Date
    Jan 2015
    Location
    Plano, Texas. Rexburg Idaho. Scottsdale Arizona
    Posts
    27

    Default Limb Risers For 5th Gen 4Runner

    I have a Trd Pro 4runner

    Currently have a gobi roof rack installed, with wind deflector, and LED bar.... up front i have a basic brush guard as shown in the image below

    unnamed.jpg

    Anyone have sucess with fabricating or buying limb risers for a 5th ten 4runner?

    Or anyone know a set up that would work in my case?

  2. #2
    Join Date
    Feb 2017
    Location
    Vancouver, Canada
    Posts
    398
    You can buy some sleeved, steel cable and crimps for it from your local hardware store. Should be an easy DIY project!
    Build thread.

    Don't follow me, I have no idea where I'm going.

    Instagram: @eatsleepwoof

  3. #3
    Join Date
    Aug 2013
    Location
    San Diego, CA
    Posts
    1,662
    Run into many trees in AZ?

    JK.

    Like said above^^^ go to Home Depot.

    I bought some Vinyl Coated Steel Rope from HD for a banister project I was doing. I bought a 30ft spool of it for something like $15.

    Make sure they're legal wherever you will be. If I remember correctly, they are illegal in CA.

  4. #4
    Join Date
    Feb 2017
    Location
    Vancouver, Canada
    Posts
    398
    Legality is something I forgot to mention. Definitely worth checking. Illegal here in BC - pedestrian safety and all that.
    Build thread.

    Don't follow me, I have no idea where I'm going.

    Instagram: @eatsleepwoof

  5. #5
    Join Date
    Jan 2015
    Location
    Plano, Texas. Rexburg Idaho. Scottsdale Arizona
    Posts
    27
    ill look more into a diy project then

    just curious if anyone had come out with something for a gen 5 4r

  6. #6
    Join Date
    Sep 2011
    Location
    Las Vegas, NV
    Posts
    12
    There's a thread on t4r.org/5th gen:

    http://www.toyota-4runner.org/5th-ge...nt-bumper.html

    I thought the consensus on these boards were against the use of brush guards.

    https://forum.ih8mud.com/threads/bru...ipliers.84483/
    2014 SR5 4Runner/Icon Stg2, 255/80 ST Maxx, Frontrunner 3/4 rack.
    2008 GX470/KO2s, LEDs, trying to stay stock!
    GONE: 2006 LX470, stock; 1996 Toyota Land Cruiser/locked, lifted, and slow

  7. #7
    Join Date
    Jan 2014
    Location
    Texas
    Posts
    161

    Default Limb Risers For 5th Gen 4Runner

    What everyone is saying. Vinyl coated cable and turnbuckles. You can attach to the bar or I have seen others use hood channel CB antenna mounts for the front brackets.

    I did a variation on this yesterday repurposing a light bar mount.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •