Page 3 of 3 FirstFirst 123

Thread: Another trailer thread...

  1. #21
    I made some progress on the fenders; they are both welded into place. I welded in a piece of 1 1/2" angle iron on either side of the tire and then welded on a 3/4" square tube on top of this. The square tube is just for cosmetic purposes. Behind each tire I will be putting in a 1 1/4" square tube to begin the frame work for the tub I will eventually be building. This will create a 7' x 4' deck in the middle which will be plywood. I just need to add some more angle iron to support the plywood (I'll be adding these along the outline of the yellow in the pic). I've outlined where this will be in the pics; the yellow space will be the deck and the blue spaces will be open areas for accessories and what not. Let me know what you think so far!

    20171218_225256131_iOS.jpg

    20171218_225321572_iOS.jpg

    20171215_234204889_iOS.jpg

    20171215_233953613_iOS.jpg

  2. #22
    Join Date
    Jul 2013
    Location
    Temperance, MI
    Posts
    298
    Depending on the weight you may need to replace the springs. The frame look beefy enough. Good luck on the build!

Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •