jgaz
Adventurer
This is my simple, single can version, of Rayra's original good idea. I just glued and screwed together some misc. pieces of 3/4" plywood that was cluttering up my shed. I show it with a MWC but my small Jerry can for the generator or chain saw will also fit quite well. I haven't tried it with my 5 gal. Wavian can since its up north. Might need a Mark 2 edition for it.
Here is the obviously unpainted version shown where it may ride when I don't haul my mt. bike for auxiliary transportation. I wanted it to fit beside the tool box in order to leave the rest of the bed open. The bolt passes through a drilled hole in my tie down rails. I can mount it other places in the bed by slipping a tee nut into the tracks.
It's shown here with a 2 1/2 gal. MWC. It will secure a 5 gal. can just by raising the rear strap mounting location.
Not sure why the last pic is turned 90'
Here is the obviously unpainted version shown where it may ride when I don't haul my mt. bike for auxiliary transportation. I wanted it to fit beside the tool box in order to leave the rest of the bed open. The bolt passes through a drilled hole in my tie down rails. I can mount it other places in the bed by slipping a tee nut into the tracks.
It's shown here with a 2 1/2 gal. MWC. It will secure a 5 gal. can just by raising the rear strap mounting location.
Not sure why the last pic is turned 90'
Last edited: