So looking to order a Drexel axle for my M101A3 trailer so that I can switch to a 5on5 hub with electric brakes to tow behind my Jeep JKU with matching wheels and tires so I can get away with a level ride height, matching look, and one spare for the setup.
The question is how long should I go for hub to hub measurement? I have seen some people run 68” axles with 2” spacers to clear the trailer hub grease caps. But the wheels I am running have a 3.01 centerbore so they should clear the normal Drexel hub grease caps. I have Fuel Krank 20x9” wheels with a 5” backspace and 3.075” centerbore. Wrapped in Nitto M/T 295/60r20 which are about 12” wide.
I was thinking 73” for hub face, thoughts?
The question is how long should I go for hub to hub measurement? I have seen some people run 68” axles with 2” spacers to clear the trailer hub grease caps. But the wheels I am running have a 3.01 centerbore so they should clear the normal Drexel hub grease caps. I have Fuel Krank 20x9” wheels with a 5” backspace and 3.075” centerbore. Wrapped in Nitto M/T 295/60r20 which are about 12” wide.
I was thinking 73” for hub face, thoughts?