MattJ
Adventurer
I have a Olympic 4x4 cargo rack in the back of my JK that is supported by horizontal bolts that I drilled into my roll bars. So the rack is extremely solid and can support a LOT of weight with no sag. I want to install a fridge, but have only 20 inches of clearance under the rack. And I have two large subwoofer speakers in the center of the cargo area, under the weather mat.
I would like to design a pull-out slide that mounts to the underside of my cargo rack and is NOT anchored to anything else. Ideally, the base of the fridge would be an inch or so above the weather mat in my cargo area, with the cargo rack and roll bars taking the weight. I have seen hanging baskets in closets that are the inspiration for this idea.
I am interested in suggestions and ideas from the creative experts on this forum!
Photos are below, including one that shows a YETI Tundra 65 in the space where the fridge would go. The two fridges I am considering are:
https://www.snomasterusa.com/product/classic-series-bdc-65-stainless-steel-acdc-fridgefreezer/
http://store.arbusa.com/ARB-Fridge-Freezer-63Qt-10800602-P21328C48.aspx
I would like to design a pull-out slide that mounts to the underside of my cargo rack and is NOT anchored to anything else. Ideally, the base of the fridge would be an inch or so above the weather mat in my cargo area, with the cargo rack and roll bars taking the weight. I have seen hanging baskets in closets that are the inspiration for this idea.
I am interested in suggestions and ideas from the creative experts on this forum!
Photos are below, including one that shows a YETI Tundra 65 in the space where the fridge would go. The two fridges I am considering are:
https://www.snomasterusa.com/product/classic-series-bdc-65-stainless-steel-acdc-fridgefreezer/
http://store.arbusa.com/ARB-Fridge-Freezer-63Qt-10800602-P21328C48.aspx