Page 14 of 14 FirstFirst ... 4121314

Thread: DIY Composite Flatbed Camper Build

  1. #131
    Join Date
    Nov 2013
    Location
    Spartanburg SC
    Posts
    190
    Odds and ends;
    IMG_20180106_114254910_BURST000_COVER_TOP.jpg

    IMG_20180106_114500180_BURST000_COVER_TOP.jpg



    Original plan was to locate the propane tank under the flat bed in one of the boxes and use a
    quick connect. Decided against this and went with interior placement. Instead of a large access door, a small
    access door to allow easy on off and meter read. Compartment built to isolate and insulate tank from rest of living space.
    Small vent installed in case of leakage.

    IMG_20180106_114820710.jpg

    Found some peel and stick vinyl at Home Depot for about $30.

    IMG_20180110_172244968 (1).jpg

    Here is the REDARC in comparison to the inverter. Should be a nice fit.
    Last edited by Terra Ops; 01-13-2018 at 01:12 PM.

  2. #132
    Join Date
    Dec 2017
    Location
    WY
    Posts
    2
    The other electric jack I'm aware of is what I have on my current camper - Happijac

Page 14 of 14 FirstFirst ... 4121314

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •