Page 2 of 2 FirstFirst 12

Thread: Canter model decoding for Australian models

  1. #11
    Join Date
    Mar 2010
    Location
    Brisbane, Australia
    Posts
    460
    Hey if i put the rego number 572TGL into QLD transport system it comes up as vin 6F6G4G87DST000017 1995. ??????????????
    FG639w6.

    Pete and Kel

  2. #12
    Join Date
    May 2015
    Location
    Brisbane
    Posts
    13
    Hi. I think I accidently deleted on of my posts.
    My 10/92 is a 4wd FG439C
    For some reason on my rego it's listed as a 93

  3. #13
    Join Date
    May 2015
    Location
    Brisbane
    Posts
    13
    Quote Originally Posted by canter tourer View Post
    Hi Dave,

    I assume your 92 model is 2wd?, from what I know there has not been a lot of significant change in chassis lengths over the years, and the 2wd chassis are generally longer than the 4wd variants.

    As an example, the current model 4wd https://cdn.fuso.com.au/Docs/SpecShe...wide%20cab.pdf has 1808mm rear cab to axle and the 2wd https://cdn.fuso.com.au/Docs/SpecShe...rew%20Cabs.pdf has 2271mm for the same spec. and these figures are pretty close to your quoted estimated figures.

    Dave
    So these are the type of spec sheets I'm looking for.
    Are these available for 93 & 09 models?
    What I am thinking is the 4.9 turbo diesel with 5 stud wheel so I can swap my wheels over. I believe they went to 6 stud in 2010.
    Not particularly interested in vehicle with DPF or SCR either.
    Am I on the right track with 09 model?

    Cheers
    Dave

  4. #14
    Join Date
    May 2015
    Location
    Brisbane
    Posts
    13
    Quote Originally Posted by PKDreamers View Post
    Hey if i put the rego number 572TGL into QLD transport system it comes up as vin 6F6G4G87DST000017 1995. ??????????????
    FG639w6.
    Dodgy????

  5. #15
    Join Date
    Nov 2010
    Location
    Canberra Australia
    Posts
    1,843
    Quote Originally Posted by dZak View Post
    I believe they went to 6 stud in 2010.
    As far as I know, the FG84, from 2008 onwards, has 6 stud wheels.
    My attempt to build something to go somewhere else...
    Canter4x4.com

  6. #16
    Join Date
    Mar 2010
    Location
    Brisbane, Australia
    Posts
    460
    Quote Originally Posted by dZak View Post
    Dodgy????
    Sum people guess the year too without looking.

    Yes FG84 2008 was the first of the 6 stud wheel.

    Pete and Kel

  7. #17
    Join Date
    May 2015
    Location
    Brisbane
    Posts
    13
    Quote Originally Posted by PKDreamers View Post
    Sum people guess the year too without looking.


    Yes FG84 2008 was the first of the 6 stud wheel.
    Did the 5 stud come with the 4.9L engine?

  8. #18
    Join Date
    Mar 2010
    Location
    Brisbane, Australia
    Posts
    460
    Quote Originally Posted by dZak View Post
    Did the 5 stud come with the 4.9L engine?
    4.9 turbo 6 stud 2008 to 2012

    3.9 turbo 5 stud 2002 to 2008
    4.2 non turbo 5 stud 92 to 2002
    3.3 non turbo 5 stud ??? 1986 to 1992 .

    These yeard are approximate because there are a few over laps and refering to FG models.

    Pete and Kel

  9. #19
    Join Date
    Nov 2010
    Location
    Canberra Australia
    Posts
    1,843
    And for completeness...
    3.0 turbo 6 stud 2012 to now (FGB71)
    My attempt to build something to go somewhere else...
    Canter4x4.com

  10. #20
    Join Date
    May 2015
    Location
    Brisbane
    Posts
    13
    Thanks to all for the info so far.
    If anyone has copies of the spec sheets for vehicle dimensions as per the previous post for 93, 06 & 12 models so i can compare the differences between dual cab and single cabs it would be much appreciated.

    Cheers
    Dave

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •