Truck Camper for 6.5ft bed, San Diego

jmodz

Active member
So it has come time to sell my truck camper. It fits all full sized trucks with a 6.5ft bed. The shell was manufactured by Bel-Air in 2015 and I am the second owner. The original owner had them reinforce the cabover to support 300lbs (regular is 150 lbs) to allow somebody to sleep on it. He also had them add R15 insulation in the walls for cold weather. The final custom thing he did was offset the rear door so you could put larger items (or build larger cabinets) on one side. I've haven't made to many adjustments to the camper itself since I bought it except rethink the sleeping area, so now the bed is slightly larger than a queen sized bed. The mattress is 3 inch foam with 1 inch memory foam, for a total of 4 inches thick. It was made by a custom mattress shop in Fresno and is extremely comfortable! I built out my own cabinetry in the bed but this is not connected to the shell. I am planning on keeping the cabinetry that I built unless you really want it, but bear in mind I am no carpenter. One of the cabinets has a sink and water pump in it that will be included if you want them. The water pump is wired for a car style plug now that I run off of a Goal Zero Yeti battery. I don't have the exact weight of the shell but the guy who installed it for me said he thought it weighed approximately 250lbs.

If you have any questions you can PM me or text me at 619-840-9774. I am located in San Diego and price is $2,200 OBO.
 

Attachments

  • IMG_4516.jpg
    IMG_4516.jpg
    567.4 KB · Views: 87
  • IMG_4514.jpg
    IMG_4514.jpg
    550.6 KB · Views: 89
  • IMG_4462.jpg
    IMG_4462.jpg
    532.2 KB · Views: 83
  • IMG_4461.jpg
    IMG_4461.jpg
    563.8 KB · Views: 80
  • IMG_4626.jpg
    IMG_4626.jpg
    513.7 KB · Views: 89
  • IMG_4627.jpg
    IMG_4627.jpg
    519.4 KB · Views: 86
  • IMG_4602.jpg
    IMG_4602.jpg
    527.7 KB · Views: 83

Forum statistics

Threads
185,531
Messages
2,875,588
Members
224,922
Latest member
Randy Towles
Top