2011 North Star 850 on 2012 Ram 2500 question

[ripperj]

Found a like new '11 North Star 850 locally, it does not have the additional spacer blocks screwed to the bottom frame like I have seen on other NS hard sides. I forgot to measure the height of the vertical sides that go in the truck bed. Anyone know if it will fit without 2x4s to raise it up?
I called Northstar twice, but never made contact with any one that could help.
i plan to bring a few 2x4s cut to length for temp transport, but will pick up pressure treated and stainless screws if it will be permanent.
thanks

Sent from my Z10 using Tapatalk 2

 

[docdave]

...remember the good old days when pickups were all the same size?

 

[Jr_Explorer]

...remember the good old days when pickups were all the same size?

Nope. I think you just dated yourself! :victory:

 

[Regcabguy]

Have fun with that combo.
Suspension enhancements galore out there.
Carli &Thuren to name but two.

 

[brian90744]

Northstar side height

Found a like new '11 North Star 850 locally, it does not have the additional spacer blocks screwed to the bottom frame like I have seen on other NS hard sides. I forgot to measure the height of the vertical sides that go in the truck bed.




Measured mine it 20" , hope this helps

 

[ripperj]

Thanks, 20" will be close, sounds like I better plan on some blocking.

Sent from my Z10 using Tapatalk 2