ohpyramids
Adventurer
Selling my 2013 Ktm 990 Adventure Baja with 10,129 miles. This bike has all the upgrades and bling, never been ridden on dirt, and is 100% ready for a major trip today. Priced at $12,600.
I bought the bike in March of 2014 on a fly & ride to Texas. It was awesome. The previous owner did 95% of the mods and upgrades as detailed below. He was amazingly meticulous with the installs. Since then, I’ve put an average of 4900 miles a year on the bike, which consisted of pavement weekend trips and commuting to work. All major services were either done with Lior (premiere SoCal KTM tech) or at KTM dealerships. I took care of the simpler maintenance tasks and all receipts for maintenance.
Heres a list of mods and upgrades on the bike:
Charcoal cannister has been removed
Secondary air injection system has been removed
O2 sensors have been removed with O2 sensor eliminator plugs in place
Moto Hooligan air filter system
FMF aluminum slip on mufflers
Headlight guard/ Touratech
Stainless steel front sprocket cover/ Touratech
Skid plate with quick disconnect feature/ Black Dog Cycles and KTM Twins
Rally fan/ CJ Designs. The bike now has dual cooling fans vs the OEM single fan set-up
190F thermostat switch vs OEM 221F/ KTM Twins
Custom clutch cover/ CJ Designs
Quick drain oil line set-up/ CJ Designs
Quick desconnect fuel lines/ CJ Design
Side stand modified by CJ Designs. The length can now be adjusted
Side stand relocation kit/ Black Dog Cycles
Quick axle/ wheel removal front and rear/ Zip Ty Racing
Center stand lift handle and aluminum chain guard units/ Rally Raid
Right side mirror relocation to match the left side/ Black Dog Cycles
Orange anodized pieces- Front and rear brake fluid reservoir lids, swing arm pivot holes, timing hole plug, oil filter cap/ KTM Twins, CJ Designs
Rear brake fluid reservoir guard/ Black Dog Cycle
Oversized clutch fluid reservoir/ CJ Designs
Oberon clutch slave cylinder in anodzed orange/ CJ Designs
Pingel stainless steel fuel filter
Initial oil and filter change done, Motorex 10W50
Removed what I thought was a bit gaudy graphics on the rear panels and replaced with more subtle "adventure" decals.
Rotweiller Performance, quick detachable glove box modification. One twist of the latch pin, and the entire gove box as a unit can be removed vs. 12 screws. Very neat item.
Doubletake mirrors
Rox Risers
Knight Design 7/8” Lowering pegs (will also include stock pegs)
Additional KTM gel seat also included (not pictured)
Wolfman luggage racks (unobtanium and awesome) (also will include stock grab handles)
Yellow Pig windshield mod
Here are some links to the suppliers tapped in prepping this bike:
http://www.fmfracing.com/
http://www.motohooliganperformance.com/
https://www.ktmtwins.com/
http://blackdogcw.com/
http://www.dualsportwarehouse.com/CJ-Designs-Adventure-Accessories_c3.htm
http://www.ziptyracing.com/
http://www.twistedthrottle.com/?gclid=CObT-KfQ7rwCFctcMgod3BYArg
http://www.touratech-usa.com/
https://www.rally-raidproducts.co.uk/
http://www.rottweilerperformance.com/
There are two blemishes on the bike. Cutting down the windshield for the Yellow Pig mod caused some small stress fractures in the plastic around the anchoring screws. They don’t affect the function in any way. There are some rubs on the left crash bar. Otherwise, its a very clean bike.
I have a clear California title registered in my name. Current California Registration is good until April of 2017. Once payment is settled, I will immediately provide you the bike, tool kit, manual, two sets of keys, etc.
I am located in Los Angeles between Culver City and Downtown, which is about 25 minutes from LAX. Fly in, I'll pick you up, and ride this bike home if desired.
I will also assist with helping to arrange and schedule shipping if needed. My friend owns Motoshippers and they are amazing.
I will do whatever I can to make the transaction a pleasant and enjoyable experience for the buyer. I am easy and flexible as long as I’m not stuck at work.
Thank you for your interest.
