According to the spec table for BFG KOs in this size, the rim width range is 8 - 9.5". You could look up the specs for other brands, but I suspect 7" is too narrow for this tire. I don't know what the consequences are for going against the manufacturer's recommendation.
It will work, but you will get crown wear at an accelerated rate. I have mounted 12.5" tires to 7" rims before. Just keep an eye on tire pressures and rotate every 5,000 miles.
Reason i ask if because i have some 305/70-16 MTR's on my stock 16x8 alloys.
I just picked up a set of 16x7 steel factory tundra rims with the correct backspacing for CHEAP $.
I am going to get a set of more street friendly tires for longer trips and i am trying to decide what goes where. I will most likely put the street tires on the steel rims and go with the 285/75 flavor!
The only place in the world you can get used Toyota parts for cheap.....and a cheap date.......oops.....I mean a date......with just a few clicks of your mouse!!!
.
.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.