Rook's Project K.H.A.O.S

[Rook]

Rook's 2007 Nissan Xterra, Codename: Project K.H.A.O.S

Year: 2007
Make: Nissan
Model: Xterra
Trim: S
Color: Desert Stone
Codename: Project K.H.A.O.S

Powertrain/Driveline Mods:
- Volant CAI
- Donaldson Powercore Filter
- Custom Built 2.5" Stainless Steel Catback Exhaust (including custom y-pipe replacement)
- Flowmaster 44 Super Offroad Muffler
- Superchips Coretex 87 Octane Tuned
- Doug Thorley Headers (still not on )

Armor:
- KMA Custom Front Bumper with "A" type grille guard (on order))
- NXRocks Split Sliders - Flat Black (first batch )
- NXRocks Engine Skid Plate (installed 01-07-10)
- NXRocks Transmission Skid Plate (Installed - 01-01-10)
- NXRocks Radiator Skid Plate (Installed - 01-01-10)
- NXRocks Transfer Case Skid Plate (Installed - 01-01-10)
- NXRocks Gas Tank Skid Plate (Installed - 01-01-10)
- Shrockworks Rear C200 Diff Cover (on order...forever...)

Exterior Mods:
- Custom Rear Recovery Mod
- DepHep custom roof rack! (installed 12-27-09 painted black)
- Stealthed 16" "S" Type Wheels
- Stealthed KC Daylighter Rockguard Covers (installed 1-01-10)
- Stealthed Rear Step Pads
- Stealthed Front Grille
- Stealthed Rear Bumper Step Pad
- Stealthed/Red Rear Step Panels (new)
- Diff Breather Mod
- Xoskel Lo Pro Front Light Cage
- Xoskel Rear Light Bar
- Xoskel Front Bumper Mouth Fog Light Bar (in garage!)
- Nissan Hood Bug/Rock Deflector (new)
- Nissan Window Rain Guards (new)
- Harbor Freight Grip Strips (new)

Electrical:
- Dedicated Gateway Laptop OBD-II monitoring system
- Elmscan 5 Tool with USB
- PCMSCAN 2.0 - OBD-II Scan Tool Diagnostic, Datalogging & Dyno Software
- Pioneer AVH-4000 Head Unit with DVD bypass Mod
- 2x Infinity Kappa 6x9" Speakers
- 2x Infinity Kappa 5 1/4" Speakers
- 200W Infinty Basslink Subwoofer
- Pioneer 4CH Amplifier
- 4x 130w 6" KC Daylighters on Roof
- 2x 55W 2x6" Rear KC Floods
- 2x 55W Pilot Navigator Driving Lights w/ Rock Guards on Grille
- OTTRATTW Rocker switches
- Relocated VDC Button
- Rear Cargo "REV MOD" with bypass switch
- LED Festoon Lights
- Midland CB Radio (new)
- Newtronics 6000 External CB Radio Speaker (new)
- ASUS R700T GPS
- VVME 9007 HID Headlights (installed 12-21-09 new)
- Custom Khaos LED Nissan Badge Mod!
- XO Vision HTC35 Universal Weatherproof Camera for undercarriage monitoring (wiring done) - and yes im insane!
- Cupholder red LED mod (new)
- Fully Swapped Exterior Lights with V-LED LED'S (brand effing new)

Suspension/Tires:
- 2.0 Radflo coilovers w/ 600lb Eibach Springs (installed 1-17-10)
- PRG UCA's (Heim Joints) (installed 1-17-10)
- Titan U-bolt Flip Plate Mod (installed 11-26-09)
- PRG Cam Bolts
- Deaver 2inch Lift AAL's (new)
- 5125 Rear Bilstein Shocks (new)
- PRG Adjustable Shackles (new)
- 285/75/16R Definity Dakota MT's (+1 spare on steelie)
- Stillen Sport Rotors (front and rear) (installed 12-27-09)
- Stillen Metal Matrix Brake Pads (installed 12-27-09)

Internal/Misc:
- Lobo Rack
- LED Maglight with Cargo area mounting bracket
- Hood Rod Mod
- Advanced Auto Seat Covers
- Advanced Auto Rubber Floor Mats
- ADD Sport Guage Cluster (not installed yet)

Recovery/Safety Gear:
- 4x Trail Gear Recovery D-Ring Shackles (WLL rated for 14,000lbs)
- Kiddie Fire Extinguisher w/ Guage mounted in cargo area
- First Aid Kit
- 3x30 17,000lb Tow Strap
- 2x20 10,000lb tow strap w/ hooks
- 48" Hi-Lift
- Hi-Lift Offroad Base
- Hi-Lift Handle Keeper
- Recon 10500lb Pro Performance Series Waterproof Winch w/ Wireless Remote (in garage)
- Blue Recon Synthetic Rope Rated for 16500lbs (in garage)
- Aluminum Hawse Fairlead (in garage)



Removed and ******** Canned (or just stored)
- Front 2" PRG Spacers (sitting on garage as spares)
- Custom Stealthed Melted KC light Covers :tard: (courtesy of Sam Adams)
- Rear Sway Bar (new)
- Plastic Engine Cover
- OEM Header Heat Shields
- Mudflaps
- OEM Air Intake
- Siezed Lower Control Arms (don't worry I replaced them )
- OEM unadjustable camber bolts (paperwieghts now)
- OEM Exhaust cut from the Y-pipe back
- Front Sway Bars (removed 1-16-10)

When she was a baby, I found some mud:

Drive By!

Flex!

The list of Khaos (items to come not in any specific order..):
-Rear custom fabbed bumper
-OBA
-Custom Rear Recovery Points (Coming Soon!)
-Amsoil Front, Transfer Case, and rear Diff Fluid
-TRAINHORN!!!!!
-LED Offroad Light Bars (expensive!!)
-Fridge
-Rear Hatch Tent
-Axe
-KC Daylighter HID retrofit

 

[Rook]

interior

this is how it all cam about....first i decided I liked offroading (how it all starts right... ) so i got an xoskel roof cage and mounted up some KC's:

ripped apart truck and then running wiring to roof:

drilling thru roof..OUCH!:

the awesome OTRATTW.com switches!!

switches and pioneer AVH-4000 HU:

then while working on the engine the hood fell on my head...so i did this:

Hood Gas Shock Mod:

keeps it nice and high and off my noggin...I love it!

 

[Rook]

cargo area mods

So i decided I like offroading and camping SO MUCH that i needed more light to find things and set up in the dark. I like to bring females camping with me (for obvious reasons ) and they always make me late so i have to set up in the dark...

C-Pillar LED mod (aka the "Rev" mod)

LED's in C-pillars and lobo rack mod:

stay tuned

 

[Rev]

:victory: Rev Mod ******!

You need to get a body lift on there so you know what you are doing this summer when you put mine on.

 

[Rook]

it's def crossed my mind more than a few times. I'll be willing to be I'll be body lifted within the next 3 months...

 

[Rev]

That is a safe bet knowing you.

 

[IZVERG]

Hey B, does that "Compressor Fan" rocker actually work your compressor fan? Or was OTRATTW out of the others?!

 

[Rook]

Chase,

that compressor switch is wired and ready to rock, however the compressor is not installed as I am waiting to get the new KMA front bumper in to figure out mounting space after the winch is installed. The idea is to mount it in the engine compartment somewhere out ofthe way of other things (which will be tricky given the layout of our engine bay). I want OBA and will pipe back to a tank under the rear cargo area from this compressor. I will then be running future lockers, air tools, ect. off of this OBA system. Thanks for asking. I plan on posting more photos of my build progress sometime today.

 

[IZVERG]

Ahaa, gotcha. Nice plannin'!