Page 1 of 7 123 ... LastLast

Thread: Another E350 build thread

  1. #1
    Join Date
    Jul 2011
    Location
    Montrose, Colorado, USA
    Posts
    138

    Default Another E350 build thread

    After lurking here for quite awhile, our family of 3 now has the makings of a 4x4 camper van! Thanks to everyone here who has provided inspiration and great ideas!

    We bought a 2001 E350 extended body (7.3L diesel) with a salem kroger 4x4 conversion. Right now it's just a bare cargo van. It was posted in the vehicles for sale section a few weeks ago.

    The end goal is to do a year-long trip in South America in 2-3 years' time. In the meantime we'll use it for camping vacations and the like, and take the opportunity to get to know it and kit out the interior to our liking.

    We're having Derek at Colorado Camper Van do the conversion for us, in phases. One of my goals in posting here is to get opinions on some of the decisions I'm having a tough time with. Here's the first one that we need to decide on soon, since the pop-top will be one of the first things we add:

    Should we go with a high-top pop-up or a low-profile pop-up (like a SMB?) The high-top is still a canvas sided pop-top, but provides enough room for someone my wife's height to stand up with the top down. That could make it easier to make lunches while on the road without raising the top.

    The downside is containerability (for the eventual trip around the darien gap, and possibly further afield) - with the low profile top, the van will just fit in a standard container if we let a little air out of the tires, but the high-top won't fit in even a high-cube container. Any experience with roll-on roll-off shipping around the darien? Is containerability desirable for that trip? What about longer passages?

    Thanks!

    IMGP1079.JPG

  2. #2
    Join Date
    Aug 2010
    Location
    Phoenix, AZ
    Posts
    878
    Boy.........one pic will hardly cut it around here. But I like base model. The folks at http://www.panamapassage.com/ might be a good resource for Darian Gap logistics.

  3. #3
    Join Date
    Jul 2011
    Location
    Montrose, Colorado, USA
    Posts
    138
    Yeah, I know one picture isn't much, but it really is just an empty cargo van right now. I'll leave it to your imagination as to what it looks like inside. I promise to do better as the van comes together!

    Thanks for the link!

  4. #4
    Join Date
    Feb 2011
    Location
    Denver
    Posts
    155
    im just north of you in lafayette if you wanna see my derek/ccv top, it is called a 14" i think. im sitting tight at 8'-9" give or take. what is a container height? i was thinkin they were 9'. i really like the added versitility of the "TV" top in every day use, i can stand up in it confortably in the section not occupied by the bed

  5. #5
    Join Date
    Oct 2011
    Location
    Up In The Mountains
    Posts
    71
    Remember to think about the weather, ANY pop-up or lift-up top has drawbacks in cold or heavy rain type weather. Just one example may be the canvas is icy or wet from a nighttime storm (and cold) sometimes the top will not fold back in properly and sometimes the wet drips inside the van after you get it folded down. One of good things is you retain your original fuel mileage with a pop-up but a solid high-top may cut that down. It’s one of those “How are you going to use it” things.
    2003 Ford E-350SD 4x4
    V10 / 4R100 / NV271
    Front Axle - 1 Ton Spec Dana 60 / King Pin / Open Knuckle / High Steer
    Rear Axle - 1 Ton Spec Dana 60 / Full Floating
    Eaton E-Lockers Front And Rear / 4:10 Gears
    ARB Differential Covers / Nodular Iron With Dipstick And Drain Plug
    Leaf Spring Suspension Front And Rear
    46 Gal Transfer-Flow Fuel Tank
    ExtremeAire Magnum Air Compressor
    Reunel Rear Bumper
    On And On ...

  6. #6
    Join Date
    Jul 2011
    Location
    Montrose, Colorado, USA
    Posts
    138
    coquzzi,

    Thanks for the offer! If we decide we want to see one before making the decision we may take you up on it. The extra interior height with the top down would be really nice. A high cube container has a door height of 8'5" and an interior height of 8'10". If you're at 8'9" yours just might fit if you aired down the tires. Our van measures 86" from the ground to the gutters. Derek said to add 20" to that for the high top plus another 3" for some solar panels. That brings us to 9'1" which definitely won't fit.

    bigvan,

    I definitely appreciate your point about the drawbacks of a pop top. To add another to the list, you're adding the lifting mechanism, which is heavy and another thing to fail. With a family of three, though, we like the ability to sleep all of us "upstairs" to avoid having to convert seats to beds every night. Derek has a great idea for a kid's bed across the width of the vehicle over the driver/passenger seats.

    Also, after reading about Doug Hackney's experiences (http://www.expeditionportal.com/foru...hipping-Thread) we're thinking that container shipping is the way to go if at all possible.

    We're quickly learning that these vehicles are all about compromise!
    Last edited by witt; 01-24-2012 at 03:59 AM.

  7. #7
    Join Date
    Oct 2011
    Location
    Up In The Mountains
    Posts
    71
    Yes, Doug is not only a great guy but he has TONS of real world experience.
    2003 Ford E-350SD 4x4
    V10 / 4R100 / NV271
    Front Axle - 1 Ton Spec Dana 60 / King Pin / Open Knuckle / High Steer
    Rear Axle - 1 Ton Spec Dana 60 / Full Floating
    Eaton E-Lockers Front And Rear / 4:10 Gears
    ARB Differential Covers / Nodular Iron With Dipstick And Drain Plug
    Leaf Spring Suspension Front And Rear
    46 Gal Transfer-Flow Fuel Tank
    ExtremeAire Magnum Air Compressor
    Reunel Rear Bumper
    On And On ...

  8. #8
    Join Date
    Jul 2011
    Location
    Montrose, Colorado, USA
    Posts
    138
    We got our top situation sorted out. Here's what we ended out with, if anyone stumbles across this looking for similar information:

    Van height, ground to gutters: 86"
    Colorado Campervan high top: 16"
    Fantastic Fan: 4.5"

    High cube container door height: 101"
    High cube container interior height: 106"

    The van with the high top is 86+16=102". That means that if we air down the tires a bit, we should be able to drive right in with the high top. However, we want solar panels and a fantastic fan. The solution we came up with is to take those off before shipping. It sounds like it will be a matter of cutting out the sealant, unbolting and disconnecting them, and reversing that process to re-install. Since shipping is a fairly rare occurrence, it'll be worth the hassle for the everyday convenience of the higher top.

    Another solution we discussed was having a set of "container wheels" made. they'd be about 16" in diameter with solid rubber around the outside. We'd mount them on the vehicle and drive it into the container. I think that would reduce the vehicle height by about 7". However, the other solution saves us the weight and storage space that would be taken up by the useless-most-of-the-time wheels.

    Since high-cube containers only come in 40' lengths, we'll either have to find someone to share one with or pay for the whole thing ourselves. There's also the risk that a high-cube isn't available when we need one (I don't know how common they are).

    Thanks for the feedback everyone! It will take a few weeks to get the parts in, so we'll be taking the van up to Derek's shop sometime in early February. I'll post pics of the build process if possible, and certainly when the first phase is complete. Woohoo! Game on!!

  9. #9
    Join Date
    Aug 2007
    Location
    Central Coast CA
    Posts
    107
    regarding the container wheels, I always envisioned taking the time and asking around as you get near the port for a set of stock wheels that would fit your rig, installing them without tires at the port, and driving the rig right into the box. When you get out on the other side, sell them or pitch them!

  10. #10
    Join Date
    Mar 2009
    Location
    Phoenix AZ
    Posts
    1,658
    Get the cheapest set of low profile tires from the locals and throw them away at the other end. Airing down your "good" tires and leaving them in one spot for a week or so will not do them much good.

    Quote Originally Posted by 4cruzer View Post
    regarding the container wheels, I always envisioned taking the time and asking around as you get near the port for a set of stock wheels that would fit your rig, installing them without tires at the port, and driving the rig right into the box. When you get out on the other side, sell them or pitch them!
    2007 Freightliner Dualcab Ambulance conversion. Check it out here
    FJ75 Landcruiser 6 wheeler (Converting to an AmboCamper)
    1963 BMW /2 with a Ural Sidecar.

Page 1 of 7 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •