Anyone own a 2006-2009 Powerwagon? Need Help

[AEV Conversions]

I'm working through building my 2006 Cummins Ram into a Powerwagon, can't seem to get the truck to think its a powerwagon when it comes to the t-case light, all the wiring and hardware is correct, this is internal to the TIPM and I can't seem to find the right settings. Can any owners tell me if the cluster indicates 4WD when its in 4Low or does it indicate 4LOW when in 4 Low?

Anyone have a powerwagon near Missoula MT I could look at?

Thanks,

dh

 

[crismateski]

I have an 06, mine shows 4wd in 4 hi and 4lo in low. There is a thread on either dodgetalk or powerwagon registry that was covering the wiring diagram for this swap. You may have a resistance issue. The power wagon has a safety feature that will not let the lockers engage in 4hi. We do a "locker bypass" which is just an inline resistor on a switch to make it think it is in low.

Sent from my EVO using Tapatalk 2

 

[crismateski]

I will see if I can find the article I mentioned

Sent from my EVO using Tapatalk 2

 

[AEV Conversions]

I will see if I can find the article I mentioned

No need for the article, I've seen it.

Thanks for the info, that will help me track down the setting in the computer. Basically my TIPM software needs to be told its now a PW instead of just a lowly 2500

dh

 

[crismateski]

Good luck, If you would, share your info when you get it over at power wagon registry