Blackout Hood of a Wrangler
- Thread starter Beowulf
- Start date
toledotimber
Observer
I've thought of doing it to my XJ, especially since I have fender-mounted lights. In the end I've decided to paint the whole thing OD green this spring. That'll take care of the glare!
FJ Cruiser
Adventurer
Do you think a flat black vehicle wrap on just that part would work, or do you have to actually paint it?
Wanderlusty
Explorer
RunninRubicon
Adventurer
Rattle can paintin
Many guys are fearful of takin action in their own hands and spraying paint. Good for you for at least considering doing this. I have used rattle cans for many projects. Mask off the area, use some 800grit sandpaper to prep the area. Some like the sponge pager to do this, and then shot it with the color of your choice. I shot my previous Jeep's Zebra stripes this way, my CJ-7 Offroad Trailer and my 03' Rubi's stripes this way. Hey, I think it's the way to go to cover those deep scratches or body damages w/o alot of $$. If you don't like it-sand it off and shot it again! Cover you job with Clear Enamel and buff if out. It works! Use heat and lights to dry the paint...or live in Tucson.
Good on you, being bold enough to try something like this. A very good friend painted his Yellow Boy this way over a Chrome Yellow body. He never regrets doing so.
Many guys are fearful of takin action in their own hands and spraying paint. Good for you for at least considering doing this. I have used rattle cans for many projects. Mask off the area, use some 800grit sandpaper to prep the area. Some like the sponge pager to do this, and then shot it with the color of your choice. I shot my previous Jeep's Zebra stripes this way, my CJ-7 Offroad Trailer and my 03' Rubi's stripes this way. Hey, I think it's the way to go to cover those deep scratches or body damages w/o alot of $$. If you don't like it-sand it off and shot it again! Cover you job with Clear Enamel and buff if out. It works! Use heat and lights to dry the paint...or live in Tucson.
Good on you, being bold enough to try something like this. A very good friend painted his Yellow Boy this way over a Chrome Yellow body. He never regrets doing so.
RunninRubicon
Adventurer
Pic of Zeepra
4.5" RE ED suspension, E9000 shocks
33' MTRs on Semulock ROCK rims
Bestop canvas and seats
VDP console w/subwoofer, 7speaker over-head light bar
4.2L bored .40 w/4.0 head, shaved, ported, Manley SS valves,Crower Cam
MOPAR EFI w/ 28lb injectors, Jacob's' ignition
Borla headers and cat-back
On-board air with my "Air-bumper"F/R bumper w/tire carrier.
GM700R-4 automatic w/manual valve-body, corvette servo, elec. O/D.
It started life as white then I hand painted Zebra-stripes on it shot polyurethane over it all.
Have over $30k invested, sold for $7500.
Here's my 88' YJ I sold awhile back.0utback said:
4.5" RE ED suspension, E9000 shocks
33' MTRs on Semulock ROCK rims
Bestop canvas and seats
VDP console w/subwoofer, 7speaker over-head light bar
4.2L bored .40 w/4.0 head, shaved, ported, Manley SS valves,Crower Cam
MOPAR EFI w/ 28lb injectors, Jacob's' ignition
Borla headers and cat-back
On-board air with my "Air-bumper"F/R bumper w/tire carrier.
GM700R-4 automatic w/manual valve-body, corvette servo, elec. O/D.
It started life as white then I hand painted Zebra-stripes on it shot polyurethane over it all.
Have over $30k invested, sold for $7500.