burquedoka
Adventurer
Up for sale is a project I built for a Unimog. The camper is made up of a late 90's Flip-pac for a full sized truck mounted on a 2x4 framed and OSB sheathed tray that has been skinned and sealed with Aluminum. The whole unit is a slip in/out camper for a Unimog flat bed, though it could be used in any flat bed measuring aprox 106"x 90".
There is a custom built brush cage included that incoperates a mount for a Foxwing awning. The interior is completely unfinished and ready to be built out as you see fit. The tent material is in good shape, it does have a few pin holes and is slightly brittle due to its age, but it is in good useable condition. There is a blue factory rain fly included. I also have the rear factory lift up window if you were to ever wish to separate the Flip Pac from the tray and mount it on a traditional truck bed.
This is an unfinished project, so it is not perfect and needs work. The interior is unfinished, the steps on the door were never finished (the ladder is purely temporary), unfortunately the torsion bar is broken and needs to be replaced ( it still opens fine, it's just heavy). The fiberglass is all in very good condition structurally, I am sure it would look new if cleaned and buffed. The hinges and adjoining structure are in very good condition with little to no corrosion.
The shell could easily be separated from the tray and used on a full sized pickup, but I am selling this as a package only, it would be up to you to separate if desired.
The camper is located in Albuquerque, shipping is on your dime.
Asking $1500
There is a custom built brush cage included that incoperates a mount for a Foxwing awning. The interior is completely unfinished and ready to be built out as you see fit. The tent material is in good shape, it does have a few pin holes and is slightly brittle due to its age, but it is in good useable condition. There is a blue factory rain fly included. I also have the rear factory lift up window if you were to ever wish to separate the Flip Pac from the tray and mount it on a traditional truck bed.
This is an unfinished project, so it is not perfect and needs work. The interior is unfinished, the steps on the door were never finished (the ladder is purely temporary), unfortunately the torsion bar is broken and needs to be replaced ( it still opens fine, it's just heavy). The fiberglass is all in very good condition structurally, I am sure it would look new if cleaned and buffed. The hinges and adjoining structure are in very good condition with little to no corrosion.
The shell could easily be separated from the tray and used on a full sized pickup, but I am selling this as a package only, it would be up to you to separate if desired.
The camper is located in Albuquerque, shipping is on your dime.
Asking $1500
Attachments
Last edited:
