Selling a homebuilt sleeping platform for a 1st Gen Tacoma with an Xtracab. I build this platform to fit snug to the truck bed without a liner(sits even snugger with a herculiner/spray liner). It sits flush with the top of the wheel well allowing the maximum amount of sleeping space, while staying as low as possible for head clearance with a camper shell/soft top.
The platform is built in 3 sections to allow for easy one person, removal. The middle section can also be removed to allow for a bicycle, dirtbike, coleman cooler, to fit in the back with the 2 side sections still in place. There are 3 access points/cubby doors on each side, which allow for storage under the platform.
I'm selling this because I recently sold my tacoma, and purchased an fj cruiser.
Location:
Santa Clarita, CA
91350
Price:
$120 Firm
Pickup only
(notice the notches, they are exact and are what keep the platform from moving w/o the need to secure them)
(photo of it being built, to show how tall it is)
The platform is built in 3 sections to allow for easy one person, removal. The middle section can also be removed to allow for a bicycle, dirtbike, coleman cooler, to fit in the back with the 2 side sections still in place. There are 3 access points/cubby doors on each side, which allow for storage under the platform.
I'm selling this because I recently sold my tacoma, and purchased an fj cruiser.
Location:
Santa Clarita, CA
91350
Price:
$120 Firm
Pickup only
(notice the notches, they are exact and are what keep the platform from moving w/o the need to secure them)
(photo of it being built, to show how tall it is)
