HELP Stock 02 Taco fender height

[EricBirk]

Hey guys,

I have to pass a federal inspection on my truck, and one of the MAJOR things they look for is stock height. I cannot seem to find the information anywhere. Does someone have measurements from before they lifted their truck, or has a stock truck and can take measurements

"apparently" it is a 10 minute visual inspection so I am going to dial down the adjustable fronts, and just sack out the rear with sandbags. I just hope I can get it close enough.

 

[Cackalak Han]

I can get a measurement for you later on today. Not sure if that will be in time.

 

[EricBirk]

I can get a measurement for you later on today. Not sure if that will be in time.

I just passed the inspection about 30 minutes ago, what a joke. It literally took 3 minutes. She walked outside, checked that it had DRL's, checked the vin and mileage, and passed it...

That measurement would be good to know though so I know how much higher it actually is, if its not too much trouble.

 

[Cackalak Han]

So, from the ground to the top of the fenders, it was:

35 1/2" Drivers Front
35 1/4" Passenger Front
36" both rears

Mine is a double cab and the rears leafs are sagging. I've got 32" tires as well.

 

[EricBirk]

Thats perfect, thanks a ton!

 

[WhereTheHellIsJames?]

I just passed the inspection about 30 minutes ago, what a joke. It literally took 3 minutes. She walked outside, checked that it had DRL's, checked the vin and mileage, and passed it...

Just as I suspected! :sombrero: They're usually pretty dang easy, they just want to make sure that the truck has the required equipment, and that it matches the VIN. Congrats!

 

[EricBirk]

Just as I suspected! :sombrero: They're usually pretty dang easy, they just want to make sure that the truck has the required equipment, and that it matches the VIN. Congrats!

Yeah she said one of the big things would be the height, that had me a bit worried. Its all smooth sailing from here on in.