Doc2012
New member
Hey guys.
Some of you might know me from TTORA and T4R.org. For those of you that don't, thought I'd take a minute and say hi. :wavey:
Been stalking on here for a little bit, but finally got tired of not being able to see any pictures, so figured I'd make a profile and introduce myself and my 4Runner, Riley.
She's a 1999 Limited, 3.4L, converted to 4WD. I've already done a bunch of stuff to her. Besides the 4WD conversion, I've added Tacoma manual Hubs, Bud Built skid plates front and middle, Bud Built clocking ring on the t-case, 4Crawler 1.5" body lift, adjustable Danahoe Racing Coilovers, ARB Air Lockers front and rear, with 4.88 gears. The rear lift is comprised of 64" Chevy leaf springs, with a Tacoma 8.4" axle housing holding the 4.88's and ARB Locker. The Chevy's were mounted with RuffStuff's 63" Kit.
I've added a 1st Gen Roll Bar, with a custom speaker box, housing (2) 10" Rockford Fosgate R2D2; also on the roll bar is a custom, removable storage system(both box and system are still in the process of being worked on); Front and rear door speakers are replaced with Rockford Forgate Prime 6.5", stock Double Din replaced with a JVC Arsenal with built-in Bluetooth and rear iPod/iPhone cable. Front and rear passenger areas are tinted; front with 35%, and the back windows are tinted with 20%, ontop of the factory tint.
Future plans I have for Riley:
Currently, Riley is a non-combatant. She's had a CEL going for a long time, a P0125, and I couldn't get it figured out, though I think I have now. We shall see, hopefully tomorrow, if I've gotten the CEL cleared for good. After that, it's off to the inspection and registration station so I can get her back on the road.
Between figuring out the CEL, I've started some other projects, and have some long over due projects that need to be completed. I've been working on a gas tank for the past while, but it's taken a back seat to work, life, and other more important projects. I need to re-do the rear spring hangers, my plan is to run them through the frame instead of under it; I need to finish up the roll bar systems; and I need to build some sliders and bumpers.
I also need to mount shocks under the *** end, but I'm wiating for the gas tank to be done before I do that, seeing as how the tank is going in the spare location.
Time permitting, I might get rid of the Confer rack that I have on top right now, and build my own.
About myself:
26, Active Duty Navy Corpsman(Hence the screen name), been to Afg twice, '09, '11. Into rock crawling, working on the truck, long drives, exploring, camping, the whole nine. I want Riley to be a functional off road vehicle, as well as being able to handle some trips with the family, which she already does very well.
Here is a link to my build thread on T4R.org, as well as my Mod thread.
http://www.toyota-4runner.org/3rd-gen-t4rs/119076-docs-zrv-pic-heavy.html
http://www.toyota-4runner.org/3rd-gen-t4rs/127367-docs-mod-thread.html
Now, on to some Pics:
When I got her:
As she sits now:
Looking forward to stalking this forum more, and looking for ideas for trailers, the truck, and basically everything else!
Thanks Guys!
Some of you might know me from TTORA and T4R.org. For those of you that don't, thought I'd take a minute and say hi. :wavey:
Been stalking on here for a little bit, but finally got tired of not being able to see any pictures, so figured I'd make a profile and introduce myself and my 4Runner, Riley.
She's a 1999 Limited, 3.4L, converted to 4WD. I've already done a bunch of stuff to her. Besides the 4WD conversion, I've added Tacoma manual Hubs, Bud Built skid plates front and middle, Bud Built clocking ring on the t-case, 4Crawler 1.5" body lift, adjustable Danahoe Racing Coilovers, ARB Air Lockers front and rear, with 4.88 gears. The rear lift is comprised of 64" Chevy leaf springs, with a Tacoma 8.4" axle housing holding the 4.88's and ARB Locker. The Chevy's were mounted with RuffStuff's 63" Kit.
I've added a 1st Gen Roll Bar, with a custom speaker box, housing (2) 10" Rockford Fosgate R2D2; also on the roll bar is a custom, removable storage system(both box and system are still in the process of being worked on); Front and rear door speakers are replaced with Rockford Forgate Prime 6.5", stock Double Din replaced with a JVC Arsenal with built-in Bluetooth and rear iPod/iPhone cable. Front and rear passenger areas are tinted; front with 35%, and the back windows are tinted with 20%, ontop of the factory tint.
Future plans I have for Riley:
Currently, Riley is a non-combatant. She's had a CEL going for a long time, a P0125, and I couldn't get it figured out, though I think I have now. We shall see, hopefully tomorrow, if I've gotten the CEL cleared for good. After that, it's off to the inspection and registration station so I can get her back on the road.
Between figuring out the CEL, I've started some other projects, and have some long over due projects that need to be completed. I've been working on a gas tank for the past while, but it's taken a back seat to work, life, and other more important projects. I need to re-do the rear spring hangers, my plan is to run them through the frame instead of under it; I need to finish up the roll bar systems; and I need to build some sliders and bumpers.
I also need to mount shocks under the *** end, but I'm wiating for the gas tank to be done before I do that, seeing as how the tank is going in the spare location.
Time permitting, I might get rid of the Confer rack that I have on top right now, and build my own.
About myself:
26, Active Duty Navy Corpsman(Hence the screen name), been to Afg twice, '09, '11. Into rock crawling, working on the truck, long drives, exploring, camping, the whole nine. I want Riley to be a functional off road vehicle, as well as being able to handle some trips with the family, which she already does very well.
Here is a link to my build thread on T4R.org, as well as my Mod thread.
http://www.toyota-4runner.org/3rd-gen-t4rs/119076-docs-zrv-pic-heavy.html
http://www.toyota-4runner.org/3rd-gen-t4rs/127367-docs-mod-thread.html
Now, on to some Pics:
When I got her:
As she sits now:
Looking forward to stalking this forum more, and looking for ideas for trailers, the truck, and basically everything else!
Thanks Guys!
