Manual hub question

[Montynv]

Hi all,

Are all the hubs the same on a gen 1? Does it matter if its a 4 or 6 cylinder? I know the hub spline count is 28 on the 3.0. Reason being is that I was looking for manual hubs but a lot of the fitments list 82-87 and not compatible for the 91. Any feedback much appreciated, thx.

 

[Toasty]

Hi all,

Are all the hubs the same on a gen 1? Does it matter if its a 4 or 6 cylinder? I know the hub spline count is 28 on the 3.0. Reason being is that I was looking for manual hubs but a lot of the fitments list 82-87 and not compatible for the 91. Any feedback much appreciated, thx.

All Mitsu manual hubs are the same from 1982 on up and they work on all Mitsu 4x4's (Mighty Max, Montero and Sport) except Gen 3 and the AWD sport.

 

[Montynv]

Got it thx.

 

[plh]

All Mitsu manual hubs are the same from 1982 on up and they work on all Mitsu 4x4's (Mighty Max, Montero and Sport) except Gen 3 and the AWD sport.

Lots of incomplete information out there. What Toasty says is correct.