New M416 Trailer

[Springhilljeep]

I just got a M416 trailer and it is in great shape. I do have some questions before I start the build.

I want to run either 33 or 35 inch tires. I expect the only way to do this is a SOA.

1. What shocks, manufactuer and part number are people using once the do the SOA??

2. Do I switch out the C Shackle for a new H type shackle? If so what size shackle should I get?

3. Will I need to move the fenders or cut them to fit the tires?

4. I want to switch axle and need to know what length to order knowing the wheels will be backspaced approx 3.75 inches?

5. Will I need to move the shock mounting locations?

Any other advise that some can offer is appreciated. Thanks to all in advance.

 

[socaljeeper]

I want to run either 33 or 35 inch tires. I expect the only way to do this is a SOA.

I run 33 in tire on my M-416 without a SOA. The stock fenders will not work though.

1. What shocks, manufactuer and part number are people using once the do the SOA??

The length of the shock is a problem when doing a SOA. I think the best way to do it if you go SOA is to relocate the shock mounts and use about the same length shock.2.

3. Will I need to move the fenders or cut them to fit the tires?

Yes, the stock fenders are to small to cover a 33 in tire.

4. I want to switch axle and need to know what length to order knowing the wheels will be backspaced approx 3.75 inches?

When I put 33 in tires on the stock axle with a wheel of 3.75 BS it still had plenty of room to the tub. When I ordered my axle I had them make it an inch longer on each side

5. Will I need to move the shock mounting locations?

If you plan to do a SOA I would.