batmn77
Observer
I’m back again, with another write up/review! This time, it’s on the Orange Boxx Fabrication PSD/Molle panel. I’ve followed their Facebook/Instagram for awhile, and love all of the customized stuff they do. I found a video online of how to install this, but it was cluttered and hard to follow, so I decided to do my own write up.
First thoughts upon opening – the powdercoating was flawless and the custom TRAIL logo popped! (must say, it’s nice to see my brainchild on various products)
The 3 indicated places are where the panel mounts. The coat hanger is a 10MM bolt, the two bottom locations are Philips head screws. You will re-use the 10MM bolt at the top.
I suggest mounting all brackets to the panel prior to affixing to vehicle.
The parts package will have 5 allen bolts, 2 small and 3 larger. The 2 small allen bolts are for the top bracket. The 3 larger allen bolts are for the left side lower bracket.
Tighten everything down and admire your new panel. Then you can start loading it up!
First thoughts upon opening – the powdercoating was flawless and the custom TRAIL logo popped! (must say, it’s nice to see my brainchild on various products)
The 3 indicated places are where the panel mounts. The coat hanger is a 10MM bolt, the two bottom locations are Philips head screws. You will re-use the 10MM bolt at the top.
I suggest mounting all brackets to the panel prior to affixing to vehicle.
The parts package will have 5 allen bolts, 2 small and 3 larger. The 2 small allen bolts are for the top bracket. The 3 larger allen bolts are for the left side lower bracket.
Tighten everything down and admire your new panel. Then you can start loading it up!