Overcentre Catches Help - AT Chaser Owners Maybe?

[Nightfire]

Hi, I acquired a part finished trailer project second hand a few years ago which has been stored ever since. The tub of the trailer is very like that used on a AT chaser. The tub was already drilled to take catches but I and really struggling to find any that fit. When AT Chasers were available in the UK they had Ojop catches fitted, but these are different to my holes.

Before I have the holes welded up and re-drilled for the Ojop catches I thought I would reach out and see if anyone in the US knows what might fit or what is fitted to Chasers in the US?

Screen Shot 2017-09-24 at 17.11.21 by Philip Tonkin, on Flickr

Of course, these might not resemble anything at all and may have been an error in the original design so any feedback is welcomed!

 

[Nightfire]

Catch

Overcentre Catch Holes by Philip Tonkin, on Flickr
Overcentre Catch Holes by Philip Tonkin, on Flickr

Hole Centres are 2" by 1.5"

Top Hook

Overcentre Catch Holes by Philip Tonkin, on Flickr
Overcentre Catch Holes by Philip Tonkin, on Flickr

Hole Centres are 0.75" by 1"

The accurate spacing in Inches rather than metric makes me think it's something US made for the domestic market.

 

[Martyn]

We did not suppply the hardware for the U.K. Manufactured Chasers, so I don't know what latch you have. We'd be happy to supply you with the latches we source here in the US. E-mail me at martyn@adventuretrailers.com with a shipping address and I'll work on an estimate for you.

 

[Nightfire]

Many Thanks Martyn, I'll send you an email.