I've got some odds and ends left over from my van build. I'm leaving for Mexico in a few weeks and don't have time to take/post photos or deal with shipping, but if anybody local to the salt lake area is interested in coming by to check them out I'm open to reasonable offers. If they don't sell now I'll take photos and post them again in the spring.
1) Large heavy duty cargo platform/roof rack. Custom welded steel, about 4' x 10' with 4" high sides. Also a custom made steel ladder to go with it. This was mounted on an extended length E-350 van
2) Stainless steel Nerf bar. About 6' long. No mounting kit.
3) Swivel pedestal seat base. I bought two of these for my van, but decided not to convert the driver's seat.
4) A few solar panels by uni-solar. I think I've got two new 33 watt panels mounted in frames, and about 5-6 22 watt flexible panels for glue-down installation. The 22 watt panels are used, and some may need to have the leads re-soldered onto the panel itself
5) a bunch of new propane regulators that screw into bulk bottles, each with a short hose and screw fitting attached.
6) Large sunshade/awning. Brand new, it's made of a woven aluminet-like reflective material. Not waterproof. Perfect for desert camping or burning man.
7) Zodi hot water on demand system. hooks to a disposable propane bottle and uses a battery powered pump.
8) Laminate and vinyl plank flooring. A few different patterns, about 30 sqft of each
9) 12' porta-bote folding boat hulls. One brand new, one needs the rear transom bladder repaired. The brand new is currently listed on ebay with lots of photos.
10) A few 54"x110" pieces of marine grade clear vinyl, as used for the windows on soft tops on jeeps and ATVs. This is the good stuff, 40 mil thick pressed and polished, marine grade. I actually have these listed on ebay right now with a $40 starting bid. Willing to ship these.
11) a few 3" wide x 3' long sala webbing anchor straps with beefy metal rings on the ends. Brand new. These are the kind of think you'd put around a tree to create an anchor point to attach your winch for an extraction.
12) A roll of fiberglass exhaust/header insulation wrap. I've heard that car racers use this to wrap around and insulate their headers and exhaust. Don't know much about it beyond that.
13) 72" x 44" x3" foam mattress with cover. Used, but still decent. Free if you come pick it up.
Might be willing to consider some trades, too. I'm looking for new AGM batteries, Bilstein shocks and/or rear airbags for a 2001 quigley E350,
Chip/tuner and EGT gauge for a 7.3 powerstroke, and a small 110V MIG welder.
Feel free to email me with any questions, to discuss offers, or to arrange a time to come and look at this stuff. No shipping, no photos available at this time. If you contact me after the end of January don't expect to hear back before May.
steve
steve_susswein@hotmail.com
1) Large heavy duty cargo platform/roof rack. Custom welded steel, about 4' x 10' with 4" high sides. Also a custom made steel ladder to go with it. This was mounted on an extended length E-350 van
2) Stainless steel Nerf bar. About 6' long. No mounting kit.
3) Swivel pedestal seat base. I bought two of these for my van, but decided not to convert the driver's seat.
4) A few solar panels by uni-solar. I think I've got two new 33 watt panels mounted in frames, and about 5-6 22 watt flexible panels for glue-down installation. The 22 watt panels are used, and some may need to have the leads re-soldered onto the panel itself
5) a bunch of new propane regulators that screw into bulk bottles, each with a short hose and screw fitting attached.
6) Large sunshade/awning. Brand new, it's made of a woven aluminet-like reflective material. Not waterproof. Perfect for desert camping or burning man.
7) Zodi hot water on demand system. hooks to a disposable propane bottle and uses a battery powered pump.
8) Laminate and vinyl plank flooring. A few different patterns, about 30 sqft of each
9) 12' porta-bote folding boat hulls. One brand new, one needs the rear transom bladder repaired. The brand new is currently listed on ebay with lots of photos.
10) A few 54"x110" pieces of marine grade clear vinyl, as used for the windows on soft tops on jeeps and ATVs. This is the good stuff, 40 mil thick pressed and polished, marine grade. I actually have these listed on ebay right now with a $40 starting bid. Willing to ship these.
11) a few 3" wide x 3' long sala webbing anchor straps with beefy metal rings on the ends. Brand new. These are the kind of think you'd put around a tree to create an anchor point to attach your winch for an extraction.
12) A roll of fiberglass exhaust/header insulation wrap. I've heard that car racers use this to wrap around and insulate their headers and exhaust. Don't know much about it beyond that.
13) 72" x 44" x3" foam mattress with cover. Used, but still decent. Free if you come pick it up.
Might be willing to consider some trades, too. I'm looking for new AGM batteries, Bilstein shocks and/or rear airbags for a 2001 quigley E350,
Chip/tuner and EGT gauge for a 7.3 powerstroke, and a small 110V MIG welder.
Feel free to email me with any questions, to discuss offers, or to arrange a time to come and look at this stuff. No shipping, no photos available at this time. If you contact me after the end of January don't expect to hear back before May.
steve
steve_susswein@hotmail.com
