Replaceable shock mount sources?

[1x1_Speed_Craig]

I need to make some lower shock mounts for my M101A3 trailer, for which I've swapped in a standard 3500-lb. trailer axle. I have a couple Chevy shock mounts similar to the attached photo, but the stud diameter (OD) is too small for the military shocks. The shocks have what appears to be a 3/4" diameter. I'm not sure what other applications use a shock eye this big, but the military shocks are in great condition, and I'd like to retain them.

Can anyone recommend a source for removable shock mounts in varying sizes?

Thanks,
Craig

 

[elmo_4_vt]

The last set of shocks I bought (Bilsteins) came with a couple sets of inserts that could be put in the shock eye to different size studs. I'd look into that first. I know you can by different size collars at Lowes/Depot but I'm not sure I understand what your exact requirements are.

-

 

[1x1_Speed_Craig]

The last set of shocks I bought (Bilsteins) came with a couple sets of inserts that could be put in the shock eye to different size studs. I'd look into that first. I know you can by different size collars at Lowes/Depot but I'm not sure I understand what your exact requirements are.

-

Great idea, elmo. I already talked with my buddy at Napa, and just have to get some dimensions to work with. New bushings with a smaller hole or a sleeve/insert would both be viable options.

Thank you!
Craig

 

[tweenerlj]

Here is a source:

http://polyperformance.com/shop/Shock-Mounts-p-1-c-887.html

 

[1x1_Speed_Craig]

Here is a source:

http://polyperformance.com/shop/Shock-Mounts-p-1-c-887.html

Thanks. That's one option, but it looks like it's only availble for 2 7/8" axle tubes (1/2" bigger than my 3500-lb. axle), and with the same 5/8" stud that I already have.

Craig