BrentLibby
New member
FOR SALE: 2022 Four Wheel Campers (FWC) Project M camper for a 2015-2020 Ford F150 with 6.5 foot bed. Installed April 2022. FWC lists the dry weight on the camper as 426 lbs. I am located in Palm Springs, California, and I will meet you at either the Vista or Woodland FWC locations. Buyer pays installation fee, and any conversion fees -- this camper WILL fit on other trucks, but the conversion is more expensive than installing on an F150.
Listing for $15k, open to reasonable offers. MSRP on a new Project M camper with all of these extras is $24,000, including CA state sales tax.
Excellent used condition with no flaws, aside from minor wear and tear. Camper exterior has some scratches/pinstripes and smashed bugs, and some smudges on the pop up, plus a few erroneous drill holes on the interior from the cabinetry. Rear window was replaced and resealed in February 2025 with plexiglass, and handle was reinforced with bolts. Replaced the weak 20lb factory rear hatch struts with Suspa 40lb struts, so the hatch never sags.
I am open to selling the custom 8020 aluminum cabinetry and couch, built-in flush mount Dometic stove, Dometic CFX3 55 fridge, fridge slide and sink setup (basin, faucet, pump, tanks and tubes – runs on electric) for an additional $1k. All in, the parts and labor on the custom interior build cost close to $10k. Will share more pics of interior build if you're interested.
Features:
-Matte black aluminum diamond plate siding
-160W solar panels
-Wired for power
-BlueSea AGM battery (replaced in August 2024), could easily be upgraded to lithium setup
-ARB 6’ awning
-Yakima system with aero bars (currently in storage, never used)
-6’ exterior and interior gear tracks on driver and passenger side
-Powered rear roof fan with remote
-19” x 26” small drivers side window
-19” x 56” large passenger side window
-Interior track lights
-Smoke detector
-Custom mattress (72” x 48”)
-Custom couch cushion (72” x 32” — serves as bed extender cushion)
-Custom aluminum mounting bracket with jerry can and hooks for shower and towels
-Bug screen on rear hatch
-Reflectix window covers
-Removable and lightweight flooring setup
Listing for $15k, open to reasonable offers. MSRP on a new Project M camper with all of these extras is $24,000, including CA state sales tax.
Excellent used condition with no flaws, aside from minor wear and tear. Camper exterior has some scratches/pinstripes and smashed bugs, and some smudges on the pop up, plus a few erroneous drill holes on the interior from the cabinetry. Rear window was replaced and resealed in February 2025 with plexiglass, and handle was reinforced with bolts. Replaced the weak 20lb factory rear hatch struts with Suspa 40lb struts, so the hatch never sags.
I am open to selling the custom 8020 aluminum cabinetry and couch, built-in flush mount Dometic stove, Dometic CFX3 55 fridge, fridge slide and sink setup (basin, faucet, pump, tanks and tubes – runs on electric) for an additional $1k. All in, the parts and labor on the custom interior build cost close to $10k. Will share more pics of interior build if you're interested.
Features:
-Matte black aluminum diamond plate siding
-160W solar panels
-Wired for power
-BlueSea AGM battery (replaced in August 2024), could easily be upgraded to lithium setup
-ARB 6’ awning
-Yakima system with aero bars (currently in storage, never used)
-6’ exterior and interior gear tracks on driver and passenger side
-Powered rear roof fan with remote
-19” x 26” small drivers side window
-19” x 56” large passenger side window
-Interior track lights
-Smoke detector
-Custom mattress (72” x 48”)
-Custom couch cushion (72” x 32” — serves as bed extender cushion)
-Custom aluminum mounting bracket with jerry can and hooks for shower and towels
-Bug screen on rear hatch
-Reflectix window covers
-Removable and lightweight flooring setup
Attachments
Last edited: