A.Ross97
New member
SOLD Custom Off-Road Utility Trailer with RTT, $4500
Price: $4500
Location: Katy, Texas, USA
Trailer SOLD
Construction
The trailer frame was made using 3" 11ga. square tubing and all 10ga. sheet steel was used to make the tub, fenders, and front box. 1" 11ga. square tubing was used to make the frame of the tailgate and the frame for the front of the tub. The upright supports for the side rails were made using 2" 11ga. square tubing and the rails themselves were made using 1 1/2" pipe. The entire trailer has been coated in LineX for durability. The trailer sits on a 3500lb axle and springs, the tires are 33" with 16" rims, and the lug pattern is 6X5.5. The hitch is a rotating pintle ring. LED marker and taillights, the trailer does not have brakes.
Tent
The tent is a CVT Mt. Shasta, it is in excellent condition. The annex is included with the tent. The stock mounting rails have been replaced with 1 1/2" square tubing.
Dimensions
Overall
Length: 10'
Width: 6'
Tongue length: ~3'
Tub
Length: 56"
Width: 47"
Height: 24"
Tent Rail Height: 8"
Fender Width: 12"
Front Box
Length: 18"
Width: 48"
Height: 18" Front, 24" Back
Problems
The only problem it has had was throwing the bearing on the left side, the axle assembly was replaced.
Conclusion
The trailer is located in Katy, TX 77494. I would like to get $4500 for the trailer with the tent. I would be willing to sell the trailer without the RTT for $3000 but I do not want to sell the RTT by itself. Shoot me an email or message if interested, my email is a.conner.ross@gmail.com
Price: $4500
Location: Katy, Texas, USA
Trailer SOLD
Construction
The trailer frame was made using 3" 11ga. square tubing and all 10ga. sheet steel was used to make the tub, fenders, and front box. 1" 11ga. square tubing was used to make the frame of the tailgate and the frame for the front of the tub. The upright supports for the side rails were made using 2" 11ga. square tubing and the rails themselves were made using 1 1/2" pipe. The entire trailer has been coated in LineX for durability. The trailer sits on a 3500lb axle and springs, the tires are 33" with 16" rims, and the lug pattern is 6X5.5. The hitch is a rotating pintle ring. LED marker and taillights, the trailer does not have brakes.
Tent
The tent is a CVT Mt. Shasta, it is in excellent condition. The annex is included with the tent. The stock mounting rails have been replaced with 1 1/2" square tubing.
Dimensions
Overall
Length: 10'
Width: 6'
Tongue length: ~3'
Tub
Length: 56"
Width: 47"
Height: 24"
Tent Rail Height: 8"
Fender Width: 12"
Front Box
Length: 18"
Width: 48"
Height: 18" Front, 24" Back
Problems
The only problem it has had was throwing the bearing on the left side, the axle assembly was replaced.
Conclusion
The trailer is located in Katy, TX 77494. I would like to get $4500 for the trailer with the tent. I would be willing to sell the trailer without the RTT for $3000 but I do not want to sell the RTT by itself. Shoot me an email or message if interested, my email is a.conner.ross@gmail.com
Attachments
Last edited:
