Youngunner
Adventurer
This bumper has served me well for 8 years but won't fit with the new flatbed. Located in Gardiner, Montana (Yellowstone National Park!)
3/16 wall 5"x2" main tube with shackle mounts welded direct to frame attachment. Integrated hitch receiver. Two swingouts: tire and high lift jack on driver side and a single NATO fuel can on passenger. (Double fuel can holders seen in photos effected departure angle and were replaced with single). Each swingout has two hinges in double shear with non-greasable delrin bushings. Hardware has recently been replaced.
Bumper wrap-around side armour bolts back to frame. **Required clearance slots to be cut in bed behind rear tire.
All hardware included. Powercoated black, overall has held up great. A few chipped areas from trail use.
Asking $600 or reasonable offer.
(Stand by for more recent photo of complete bumper removed from truck.)
3/16 wall 5"x2" main tube with shackle mounts welded direct to frame attachment. Integrated hitch receiver. Two swingouts: tire and high lift jack on driver side and a single NATO fuel can on passenger. (Double fuel can holders seen in photos effected departure angle and were replaced with single). Each swingout has two hinges in double shear with non-greasable delrin bushings. Hardware has recently been replaced.
Bumper wrap-around side armour bolts back to frame. **Required clearance slots to be cut in bed behind rear tire.
All hardware included. Powercoated black, overall has held up great. A few chipped areas from trail use.
Asking $600 or reasonable offer.
(Stand by for more recent photo of complete bumper removed from truck.)
Attachments
Last edited: